Foinse mhonarcha 304 Pláta Cruach Dhosmálta / Bileog Cruach Dhosmálta 304
Seasann muid timpeall an phrionsabail um fheabhsú 'Cur chuige oibre ardchaighdeáin, Feidhmíochta, sincerity agus Down-go-talamh' chun cúnamh próiseála den scoth a sholáthar duit le haghaidh foinse Monarcha304 Pláta Cruach Dhosmálta/ Bileog Cruach Dhosmálta 304, Déanfaimid ár ndícheall ár stádas iontach a choinneáil mar an soláthraí réitigh is fearr ar domhan.Nuair a bhíonn aon cheist nó tuairimí agat, déan cinnte teagmháil a dhéanamh linn faoi shaoirse.
Seasann muid timpeall an phrionsabail um fheabhsú 'Cur chuige oibre ardchaighdeáin, feidhmíochta, sincerity agus síos go talamh' chun cúnamh próiseála den scoth a sholáthar duit.304 Pláta Cruach Dhosmálta, 304 Bileog Cruach Dhosmálta, Táimid ag dul a thabhairt isteach go leanúnach ní hamháin treoir theicniúil na saineolaithe ó bhaile agus thar lear, ach freisin ar an marsantas nua agus chun cinn a fhorbairt i gcónaí chun freastal go sásúil ar riachtanais ár gcliant ar fud an domhain.
Bileog cruach dhosmálta
Tiús:10mm-100mm & 0.3mm-2mm
Leithead:1.2m, 1.5m nó de réir iarratais
Teicníc:Fuar-rollta nó te rollta
Cóireáil dromchla:Snasta nó mar riachtanas
Feidhmchlár:
Baineann leathán cruach le réimse tógála, tionscal tógála long, tionscail peitriliam & ceimiceacha, tionscail cogaidh agus leictreachais, próiseáil bia agus malartóir teasa coire réimsí innealra agus crua-earraí etc.
Caighdeán cáilíochta: GB 3274-2007 nó comhionann le ASTM / JIS / DIN / BS etc
Grád cruach:
200, 300, 400 sraith
(201, 202, 304, 304L, 309S, 310S, 316, 316L, 317L, 321, 347H, 409410S, 420, 430, srl)
Cineál: Pláta cruach
Úsáid speisialta: Pláta cruach ard-neart
Más gá duit, pls teagmháil a dhéanamh liom faoi shaoirse.Beidh do fhreagra an-ardmeas.
1. Ceanglais Cheimiceach
peacification | Grád Cruach | C% | si % | Mn% | P% | S% | Cr % | ni% | Mo% | Ti % | EILE |
uas. | uas. | uas. | uas. | uas. | |||||||
JIS | SUS301 | 0. 15 | 1 | 2 | 0. 045 | 0. 03 | 16.00-18.00 | 6.00-8.00 | |||
G4303 | SUS302 | 0. 15 | 1 | 2 | 0. 045 | 0. 03 | 17.00-19.00 | 8.00-10.00 | |||
G4304 | SUS304 | 0. 08 | 1 | 2 | 0. 045 | 0. 03 | 18.00-20.00 | 8.00-10.50 | |||
G4305 | SUS304L | 0. 03 | 1 | 2 | 0. 045 | 0. 03 | 18.00-20.00 | 9.00-13.00 | |||
G4312 | SUS304J3 | 0. 08 | 1 | 2 | 0. 045 | 0. 03 | 17.00-19.00 | 8.00-10.50 | Cu: 1.00-3.00 | ||
SUH309 | 0.2 | 1 | 2 | 0. 045 | 0. 03 | 22.00-24.00 | 12.00-15.00 | ||||
SUS309S | 0. 08 | 1 | 2 | 0. 045 | 0. 03 | 22.00-24.00 | 12.00-15.00 | ||||
SUH310 | 0.25 | 1.5 | 2 | 0. 045 | 0. 03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS310S | 0. 08 | 1.5 | 2 | 0. 045 | 0. 03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS316 | 0. 08 | 1 | 2 | 0. 045 | 0. 03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | |||
SUS316L | 0. 03 | 1 | 2 | 0. 045 | 0. 03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | |||
SUS317 | 0. 08 | 1 | 2 | 0. 045 | 0. 03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | |||
SUS321 | 0. 08 | 1 | 2 | 0. 045 | 0. 03 | 17.00-19.00 | 9.00-13.00 | 5*C Nóiméad | |||
SUS347 | 0. 08 | 1 | 2 | 0. 045 | 0. 03 | 17.00-19.00 | 9.00-13.00 | Nb:10*C Min. | |||
SUSXM7 | 0. 08 | 1 | 2 | 0. 045 | 0. 03 | 17.00-19.00 | 8.50-10.50 | Cu: 3.00-4.00 | |||
SUH409 | 0. 08 | 1 | 1 | 0. 04 | 0. 03 | 10.50-11.75 | Ó 6*C go 0.75 | ||||
SUH409L | 0. 03 | 1 | 1 | 0. 04 | 0. 03 | 10.50-11.75 | Ó 6*C go 0.75 | ||||
SUS410 | 0. 15 | 1 | 1 | 0. 04 | 0. 03 | 11.50-13.50 | |||||
SUS420J1 | 0.16-0.25 | 1 | 1 | 0. 04 | 0. 03 | 12.00-14.00 | |||||
SUS420J2 | 0.26-0.40 | 1 | 1 | 0. 04 | 0. 03 | 12.00-14.00 | |||||
SUS430 | 0. 12 | 0.75 | 1 | 0. 04 | 0. 03 | 16.00-18.00 | |||||
SUS434 | 0. 12 | 1 | 1 | 0. 04 | 0. 03 | 16.00-18.00 | 0.75~1.25 | ||||
Sonraíocht ASTM | |||||||||||
Sonraíocht | Grád Cruach | C% | si % | Mn% | P% | S% | Cr % | ni% | Mo% | Ti % | EILE |
uas. | uas. | uas. | uas. | uas | |||||||
ASTM | S30100 | 0. 15 | 1 | 2 | 0. 045 | 0. 03 | 16.00-18.00 | 6.00-8.00 | N:0.10 Uas | ||
A240 | S30200 | 0. 15 | 0.75 | 2 | 0. 045 | 0. 03 | 17.00-19.00 | 8.00-10.00 | N:0.10 Uas | ||
S30400 | 0. 08 | 0.75 | 2 | 0. 045 | 0. 03 | 18.00-20.00 | 8.00-10.5 | N:0.10 Uas | |||
S30403 | 0. 03 | 0.75 | 2 | 0. 045 | 0. 03 | 18.00-20.00 | 8.00-12.00 | N:0.10 Uas | |||
S30908 | 0. 08 | 0.75 | 2 | 0. 045 | 0. 03 | 22.00-24.00 | 12.00-15.00 | ||||
S31008 | 0. 08 | 1.5 | 2 | 0. 045 | 0. 03 | 24.00-26.00 | 19.00-22.00 | ||||
S31600 | 0. 08 | 0.75 | 2 | 0. 045 | 0. 03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Uas | ||
S31603 | 0. 03 | 0.75 | 2 | 0. 045 | 0. 03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Uas | ||
S31700 | 0. 08 | 0.75 | 2 | 0. 045 | 0. 03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | N:0.10 Uas | ||
S32100 | 0. 08 | 0.75 | 2 | 0. 045 | 0. 03 | 17.00-19.00 | 9.00-12.00 | 5*(C+N) Min. | N:0.10 Uas | ||
0.70 Uas | |||||||||||
S34700 | 0. 08 | 0.75 | 2 | 0. 045 | 0. 03 | 17.00-19.00 | 9.00-13.00 | Cb: 10*CM isteach. | |||
1.00 Uas | |||||||||||
S40910 | 0. 03 | 1 | 1 | 0. 045 | 0. 03 | 10.50-11.70 | 0.5Mas | Ti: 6*CMin. | |||
0.5 Uas. | |||||||||||
S41000 | 0. 15 | 1 | 1 | 0. 04 | 0. 03 | 11.50-13.50 | 0.75Uasmhéid | ||||
S43000 | 0. 12 | 1 | 1 | 0. 04 | 0. 03 | 16.00-18.00 | 0.75Uasmhéid |
Dromchla le haghaidh cruach dhosmálta:
Ár stóras: