Pìoba mionaideachd stàilinn stainless ASTM airson ìre 304
Pìoba mionaideachd stàilinn stainless ASTM airson ìre 304
Is e pìob stàilinn gun staoin aon de na stuthan as cumanta anns na gnìomhachasan togail agus innleadaireachd.Is e bàr stàilinn falamh a th’ ann am pìoban gun ròn stàilinn, àireamh mhòr de phìoban air an cleachdadh airson lionntan a ghiùlan, leithid ola, gas, uisge, gas, smùid, iomlaid teas, inneal meacanaigeach.
Sònrachadh:
tiùb coil stàilinn gun staoin
coil tiùba stàilinn gun staoin
tubing coil stàilinn gun staoin
pìob coil stàilinn gun staoin
solaraichean tiùb coil stàilinn gun staoin
luchd-dèanaidh tiùban coil stàilinn
coil pìoba stàilinn gun staoin
Coitcheann:ASTM A-312 , ASTM A-269 , ASTM A-632 , ASTM A-213 , DIN 17458 , DIN 17456 JIS G3463 , JIS G3459 , JIS G3448
Ìre stuth:201/202/304/316
Trast-thomhas a-muigh:0.1mm-8mm
Tighead:0.05mm - 2.1mm
Fad:2440mm, 3050mm, 5800mm, 6000mm, 6100mm no mar iarrtas luchd-cleachdaidh
Fulangas:a) Trast-thomhas a-muigh: +/- 0.2mm
b) Tighead: +/- 10% NO mar iarrtas teachdaiche
c) Fad: +/- 10mm
Uachdar:Satain / loidhne fuilt: 180#, 320#
Pòlainneach :400 # , 600 # ,800 # no uachdar sgàthan
Iarrtas:Air a phròiseasadh a-steach do rèilichean, rèilichean-làimhe, dorsan agus Windows
PUINGEAN
Poca plastaig / pacadh fighte (cuir fios pacadh thugainn ma tha riatanasan eile agad)
Co-dhèanamh ceimigeach
Ìre | C(Max) | Mn(Max) | P(Max) | S(Max) | Si(Max) | Cr | Ni | Mo | N(Max) | Cu/Eile |
304 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.00-20.00 | 8.00-10.50 | - | 0.1 | - |
304L | 0.03 | 2 | 0.045 | 0.03 | 1 | 18.00-20.00 | 8.00-12.00 | - | 0.1 | - |
310S | 0.08 | 2 | 0.045 | 0.03 | 1.5 | 24.00-26.00 | 19.00-22.00 | - | - | - |
316 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - |
316L | 0.03 | 2 | 0.045 | 0.03 | 1 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | 0.1 | - |
Eileamaid 201 202 304 316 S31803 S32750
C ≤0.15 ≤0.15 ≤0.08 ≤0.08 ≤0.030 ≤0.030
Si ≤1.00 ≤1.00 ≤1.00 ≤1.00 ≤1.00 ≤0.80
Mn 5.5-7.5 7.5-10.0 ≤2.00 ≤2.00 ≤2.00 ≤1.20
P ≤0.060 ≤0.060 ≤0.045 ≤0.045 ≤0.030 ≤0.035
S ≤0.030 ≤0.030 ≤0.030 ≤0.030 ≤0.020 ≤0.020
Cr 16-18 17-19 18-20 16-18 21-23 21-23
Ni 3.5-5.5 4.0-6.0 42958 43022 4.5-6.5 6.0-8.0
Mo 2.0-3.0 2.5-3.5 3.0-5.0
N ≤0.25 ≤0.25 0.08-0.2 0.24-0.32
Airson ≤0.50
Feartan meacanaigeach
Stuth stuth 201 202 304 316 S31803 S32750
Neart tensile (MPa) ≥655 ≥620 ≥515 ≥515 ≥620 ≥800
Neart toraidh (MPa) ≥260 ≥310 ≥205 ≥205 ≥450 ≥550
Leudachadh (%) ≥35 ≥35 ≥35 ≥35 ≥25 ≥15
cruas (HV) ≤230 ≤230 ≤200 ≤200 ≤303 ≤323
Riatanas eile
Comharrachadh: stuth ìre, ìre, sònrachadh, teas àireamh.
Làimhseachadh uachdar: Annealed soilleir, snasta taobh a-muigh agus taobh a-staigh uachdar.
Pasgan: bundle stiallan fighe, bogsa fiodha no bogsa stàilinn
Teisteanas deuchainn muilne: a rèir EN 10204 3.2
Sgrùdadh: Sgrùdadh treas-phàrtaidh, no le clintean
Tuairisgeul na companaidh:
Tha trì loidhne cinneasachaidh aig a ’chompanaidh againn de phìob coiled stàilinn gun staoin, pìob stàilinn gun staoin, tha eòlas às-mhalairt againn airson còrr air deich bliadhna, an lùbadh, sìneadh, gearradh sàbhaidh, stampadh, snasadh agus mar sin air adhart sreath de uidheamachd giullachd, an toradh stàilinn gun staoin againn air a chleachdadh gu farsaing ann an colbh seòmar-ionnlaid, goireasan crochte, bathar-cruaidh, agus uidheamachd teasachaidh uisge dùmhlachd, solar taigh-òsta agus mar sin air adhart.ar companaidh gu dùrachdach an dòchas gum bi luchd-ceannach dachaigheil is cèin a’ toirt seachad dealbhan no sampallan.
Ma tha thu airson tuilleadh fhaighinn a-mach mun phìob / tiùb stàilinn gun staoin, cuir fios thugainn.
Tube stàilinn ceàrnagach (mm) | Tube stàilinn ceart-cheàrnach (mm) | Tube stàilinn cruinn (mm) |
10×10×0.6~3.0 | 10×20×0.6~3.0 | 6 × 0.6 ~ 1.0 |
15×15×0.6~3.0 | 20×30×0.6~3.0 | 12×0.6~1.5 |
20×20×0.6~3.0 | 20×40×0.6~3.0 | 13×0.6~1.5 |
25×25×0.6~3.0 | 25×50×0.6~3.5 | 16×0.6~2.0 |
30×30×0.6~3.5 | 30×50×0.6~3.5 | 19×0.6~3.0 |
40×40×0.6~3.5 | 40×60×0.6~3.5 | 20×0.6~3.0 |
50×50×0.6~3.5 | 40×80×0.6~3.5 | 22×0.6~3.0 |
60×60×0.6~3.5 | 60 × 80 × 1.0 ~ 6.0 | 25×0.6~3.0 |
70×70×0.6~3.5 | 50 × 100 × 1.0 ~ 6.0 | 27×0.6~3.0 |
75×75×0.6~3.5 | 60 × 120 × 1.0 ~ 6.0 | 32×0.6~3.0 |
80×80×1.0~6.0 | 80 × 120 × 2.0 ~ 8.0 | 40×0.6~3.5 |
100 × 100 × 2.0 ~ 8.0 | 80 × 160 × 2.0 ~ 8.0 | 38×0.6~3.0 |
120×120×2.0~8.0 | 100 × 150 × 2.0 ~ 8.0 | 48×0.6~3.5 |
150 × 150 × 2.0 ~ 8.0 | 100 × 200 × 2.0 ~ 8.0 | 60×0.6~3.5 |
200×200×4.0~16.0 | 150×250×4.0~12.0 | 76×0.6~3.5 |
250 × 250 × 4.0 ~ 16.0 | 200×300×4.0~16.0 | 89 × 1.0 ~ 6.0 |
300×300×4.0~16.0 | 300×400×4.0~16.0 | 104 × 1.0 ~ 6.0 |
400 × 400 × 4.0 ~ 16.0 | 300×500×4.0~16.0 | 114 × 1.0 ~ 6.0 |
Feartan fiosaigeach pìob snasta stàilinn gun staoin:
Ìre | Sgrìobhadh, % | |||||||||
carbon, | Manga- | Phos- | Sulfair, | sileacon, | nicil | Chromium | Molybdenum | Titanium | Columbium + Tantalum | |
Austenitic | ||||||||||
301 | 0.15 | 2.00 | 0.040 | 0.030 | 1.00 | 6.0–8.0 | 16.0–18.0 | … | … | … |
302 | 0.15 | 2.00 | 0.040 | 0.030 | 1.00 | 8.0–10.0 | 17.0–19.0 | … | … | … |
304 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 8.0–11.0 | 18.0–20.0 | … | … | … |
304L | 0.035A | 2.00 | 0.040 | 0.030 | 1.00 | 8.0–13.0 | 18.0–20.0 | … | … | … |
305 | 0.12 | 2.00 | 0.040 | 0.030 | 1.00 | 10.0–13.0 | 17.0–19.0 | … | … | … |
309S | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 12.0–15.0 | 22.0–24.0 | … | … | ... |
309S-Cb | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 12.0–15.0 | 22.0–24.0 | … | … | B |
310S | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 19.0–22.0 | 24.0–26.0 | … | … | … |
316 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 10.0–14.0 | 16.0–18.0 | 2.0–3.0 | … | … |
316L | 0.035A | 2.00 | 0.040 | 0.030 | 1.00 | 10.0–15.0 | 16.0–18.0 | 2.0–3.0 | … | … |
317 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 11.0–14.0 | 18.0–20.0 | 3.0–4.0 | … | … |
321 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 9.0–13.0 | 17.0–20.0 | … | C | … |
330 | 0.15 | 2.00 | 0.040 | 0.030 | 1.00 | 33.0–36.0 | 14.0–16.0 | … | … | … |
347 | 0.08 | 2.00 | 0.040 | 0.030 | 1.00 | 9.0–13.0 | 17.0–20.0 | … | … | B |
429 | 0.12 | 1.00 | 0.040 | 0.030 | 1.00 | 0.50 aig a’ char as àirde | 14.0–16.0 | … | … | … |
430 | 0.12 | 1.00 | 0.040 | 0.030 | 1.00 | 0.50 aig a’ char as àirde | 16.0–18.0 | … | … | … |
430-Ti | 0.10 | 1.00 | 0.040 | 0.030 | 1.00 | 0.075 air a char as àirde | 16.0–19.5 | … | 5 × C min, | … |
0.75 aig a’ char as àirde |
▼Tiùban coiled stàilinn / pìoban coiled ìre stuth:
Na Stàitean Aonaichte | A' GHEARMAILT | A' GHEARMAILT | AN FHRAING | IAPAN | AN EADAILT | AN T-SUAIN | RA | EU | AN SPAINN | AN RUIS |
AISI | DIN 17006 | WN 17007 | AFNOR | JIS | UNI | SIS | BSI | EACHDRAIDH | ||
201 | SUS 201 | |||||||||
301 | X 12 CrNi 17 7 | 1.4310 | Z 12 CN 17-07 | SUS 301 | X 12 CrNi 1707 | 23 31 | 301S21 | X 12 CrNi 17 7 | X 12 CrNi 17-07 | |
302 | X 5 CrNi 18 7 | 1.4319 | Z 10 CN 18-09 | SUS 302 | X 10 CrNi 1809 | 23 31 | 302S25 | X 10 CrNi 18 9 | X 10 CrNi 18-09 | 12KH18N9 |
303 | X 10 CrNiS 18 9 | 1.4305 | Z 10 CNF 18-09 | SUS 303 | X 10 CrNiS 1809 | 23 46 | 303S21 | X 10 CrNiS 18 9 | X 10 CrNiS 18-09 | |
303 Se | Z 10 CNF 18-09 | SUS 303 Se | X 10 CrNiS 1809 | 303S41 | X 10 CrNiS 18-09 | 12KH18N10E | ||||
304 | X 5 CrNi 18 10 X 5 CrNi 18 12 | 1.4301 1.4303 | Z 6 CN 18-09 | SUS 304 | X 5 CrNi 1810 | 23 32 | 304S15 304S16 | X 6 CrNi 18 10 | X 6 CrNi 19-10 | 08KH18N10 06KH18N11 |
304 n | SUS 304N1 | X 5 CrNiN 1810 | ||||||||
304 H | SUS F 304H | X 8 CrNi 1910 | X 6 CrNi 19-10 | |||||||
304 l | X 2 CrNi 18 11 | 1.4306 | Z 2 CN 18-10 | SUS 304L | X 2 CrNi 1911 | 23 52 | 304S11 | X 3 CrNi 18 10 | X 2 CrNi 19-10 | 03KH18N11 |
X 2 CrNiN 18 10 | 1.4311 | Z 2 CN 18-10-Az | SUS 304LN | X 2 CrNiN, 1811 | 23 71 | |||||
305 | Z 8 CN 18-12 | SUS 305 | X 8 CrNi 1812 | 23 33 | 305S19 | X 8 CrNi 18 12 | X 8 CrNi 18-12 | |||
Z 6 CNU 18-10 | SUS XM7 | X 6 CrNiCu 18 10 4 Kd | ||||||||
309 | X 15 CrNiS 20 12 | 1.4828 | Z 15 CN 24-13 | SUH 309 | X 16 CrNi 2314 | 309S24 | X 15 CrNi 23 13 | |||
309 S | SUS 309S | X 6 CrNi 2314 | X 6 CrNi 22 13 | |||||||
310 | X 12 CrNi 25 21 | 1.4845 | SUH 310 | X 22 CrNi 2520 | 310S24 | 20KH23N18 | ||||
310 S | X 12 CrNi 25 20 | 1.4842 | Z 12 CN 25-20 | SUS 310S | X 5 CrNi 2520 | 23 61 | X 6 CrNi 25 20 | 10KH23N18 | ||
314 | X 15 CrNiSi 25 20 | 1.4841 | Z 12 CNS 25-20 | X 16 CrNiSi 2520 | X 15 CrNiSi 25 20 | 20KH25N20S2 | ||||
316 | X 5 CrNiMo 17 12 2 | 1.4401 | Z 6 CND 17-11 | SUS 316 | X 5 CrNiMo 1712 | 23 47 | 316S31 | X 6 CrNiMo 17 12 2 | X 6 CrNiMo 17-12-03 | |
316 | X 5 CrNiMo 17 13 3 | 1.4436 | Z 6 CND 17-12 | SUS 316 | X 5 CrNiMo 1713 | 23 43 | 316S33 | X 6 CrNiMo 17 13 3 | X 6 CrNiMo 17-12-03 | |
316 f | X 12 CrNiMoS 18 11 | 1.4427 | ||||||||
316 N | SUS 316N | |||||||||
316 H | SUS F 316H | X 8 CrNiMo 1712 | X 5 CrNiMo 17-12 | |||||||
316 H | X 8 CrNiMo 1713 | X 6 CrNiMo 17-12-03 | ||||||||
316 l | X 2 CrNiMo 17 13 2 | 1.4404 | Z 2 CND 17-12 | SUS 316L | X 2 CrNiMo 1712 | 23 48 | 316S11 | X 3 CrNiMo 17 12 2 | X 2 CrNiMo 17-12-03 | 03KH17N14M2 |
X 2 Criosduidh 17 12 2 | 1.4406 | Z 2 CND 17-12-Az | SUS 316LN | X 2 Criosda, 1712 | ||||||
316 l | X 2 CrNiMo 18 14 3 | 1.4435 | Z 2 CND 17-13 | X 2 CrNiMo 1713 | 23 53 | 316S13 | X 3 CrNiMo 17 13 3 | X 2 CrNiMo 17-12-03 | 03KH16N15M3 | |
X 2 Criosduidh 17 13 3 | 1.4429 | Z 2 CND 17-13-Az | X 2 Criosduidh, 1713 | 23 75 | ||||||
X 6 CrNiMoTi 17 12 2 | 1.4571 | Z6 CNDT 17-12 | X 6 CrNiMoTi 1712 | 23 50 | 320S31 | X 6 CrNiMoTi 17 12 2 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T 10KH17N13M2T | ||
X 10 CrNiMoTi 18 12 | 1.4573 | X 6 CrNiMoTi 1713 | 320S33 | X 6 CrNiMoTI 17 13 3 | X 6 CrNiMoTi 17-12-03 | 08KH17N13M2T 10KH17N13M2T | ||||
X 6 CrNiMoNb 17 12 2 | 1.4580 | Z 6 CNDNb 17-12 | X 6 CrNiMoNb 1712 | X 6 CrNiMoNb 17 12 2 | 08KH16N13M2B | |||||
X 10 CrNiMoNb 18 12 | 1.4583 | X 6 CrNiMoNb 1713 | X 6 CrNiMoNb 17 13 3 | 09KH16N15M3B | ||||||
317 | SUS 317 | X 5 CrNiMo 1815 | 23 66 | 317S16 | ||||||
317 l | X 2 CrNiMo 18 16 4 | 1.4438 | Z 2 CND 19-15 | SUS 317L | X 2 CrNiMo 1815 | 23 67 | 317S12 | X 3 CrNiMo 18 16 4 | ||
317 l | X 2 CrNiMo 18 16 4 | 1.4438 | Z 2 CND 19-15 | SUS 317L | X 2 CrNiMo 1816 | 23 67 | 317S12 | X 3 CrNiMo 18 16 4 | ||
330 | X 12 NiCrSi 36 16 | 1.4864 | Z 12NCS 35-16 | SUH 330 | ||||||
321 | X 6 CrNiTi 18 10 X 12 CrNiTi 18 9 | 1.4541 1.4878 | Z 6 CNT 18-10 | SUS 321 | X 6 CrNiTi 1811 | 23 37 | 321S31 | X 6 CrNiTi 18 10 | X 6 CrNiTi 18-11 | 08KH18N10T |
321 H | SUS 321H | X 8 CrNiTi 1811 | 321S20 | X 7 CrNiTi 18-11 | 12KH18N10T | |||||
329 | X 8 CrNiMo 27 5 | 1.4460 | SUS 329J1 | 23 24 | ||||||
347 | X 6 CrNiNb 18 10 | 1.4550 | Z 6 CNNb 18-10 | SUS 347 | X 6 CrNiNb 1811 | 23 38 | 347S31 | X 6 CrNiNb 18 10 | X 6 CrNiNb 18-11 | 08KH18N12B |
347 H | SUS F 347H | X 8 CrNiNb 1811 | X 7 CrNiNb 18-11 | |||||||
904L | 1.4939 | Z 12 CNDV 12-02 | ||||||||
X 20 CrNiSi 25 4 | 1.4821 | |||||||||
UNS31803 | X 2 Criosduidh 22 5 | 1.4462 | ||||||||
UNS32760 | X 3 Criosduidh 25 7 | 1.4501 | Z 3 CND 25-06Az | |||||||
403 | X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 | 1.4000 1.4006 1.4024 | Z 12 C 13 | SUS 403 | X 12 Cr 13 | 23 02 | 403S17 | X 10 Cr 13 X 12 Cr 13 | X 6 Cr 13 | 12 Kh13 |
405 | X 6 CRal 13 | 1.4002 | Z 6 CA 13 | SUS 405 | X 6 CRal 13 | 405S17 | X 6 CRal 13 | X 6 CRal 13 | ||
X 10 CRAL 7 | 1.4713 | Z 8 CA 7 | X 10 CRAL 7 | |||||||
X 10 CRAL 13 | 1.4724 | X 10 CRAL 12 | 10Kh13SYu | |||||||
X 10 CRAL 18 | 1.4742 | X 10 CrSiAl 18 | 15Kh18SYu | |||||||
409 | X 6 CrTi 12 | 1.4512 | Z 6 CT 12 | SUH 409 | X 6 CrTi 12 | 409S19 | X 5 CrTi 12 | |||
X 2 CrTi 12 | ||||||||||
410 | X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 | 1.4000 1.4006 1.4024 | Z 10 C 13 Z 12 C 13 | SUS 410 | X 12 Cr 13 | 23 02 | 410S21 | X 12 Cr 13 | X 12 Cr 13 | 12 Kh13 |
410 S | X 6 Cr 13 | 1.4000 | Z 6 C 13 | SUS 410S | X 6 Cr 13 | 23 01 | 403S17 | X 6 Cr 13 | 08Kh13 |
Factaraidh
Buannachd càileachd:
Tha càileachd ar toraidhean airson an loidhne smachd ann an roinn ola is gas air a dhearbhadh chan ann a-mhàin tron phròiseas saothrachaidh fo smachd ach cuideachd tro dheuchainn toraidh crìochnaichte.Am measg nan deuchainnean àbhaisteach tha:
1.Non-destructive deuchainnean
2. Hydrostatic deuchainnean
Smachdan crìochnachaidh 3.Surface
4. Tomhais cruinneas meud
5.Flare agus deuchainnean coning
6. Deuchainn seilbh meacanaigeach agus ceimigeach
An aplacaid caillary tube
1) Gnìomhachas innealan meidigeach
2) smachd teothachd gnìomhachais air a stiùireadh le teòthachd, pìob air a chleachdadh le mothachairean, teirmiméadar tiùba
3) Tiùb cridhe gnìomhachas cùram peann
4) antenna meanbh-tiùb, diofar sheòrsaichean de antenna stàilinn beag mionaideachd
5) Le measgachadh de beag-trast-thomhas eileagtronaigeach stàilinn capillary
6) Punch snàthad seuda
7) uaireadairean, dealbh
8) Tiùb antenna càr, antennas bàr a’ cleachdadh phìoban, tiùb antenna
9) Uidheam gràbhalaidh laser gus tiùb stàilinn gun staoin a chleachdadh
10) Uidheam iasgaich, sgeadachadh, Yugan a-muigh le seilbh
11) Diet le capillary stàilinn
12) a h-uile seòrsa de fhòn-làimhe stylus agus stylus coimpiutair
13) Teasachadh pìoba gnìomhachas, ola gnìomhachas
14) Clò-bhualadairean, snàthad bogsa sàmhach
15) Tarraing tiùb stàilinn le dà leaghadh air a chleachdadh ann an ceangal uinneig
16) Measgachadh de thrast-thomhas beag gnìomhachais Tiùban stàilinn gun staoin
17) Precision riarachadh le snàthadan stàilinn
18) Micreofon, fònaichean-cluaise agus microfòn gus tiùb stàilinn gun staoin a chleachdadh, agus mar sin air adhart