ASTM A213 904 Stainless steel coiled tubes and coiled tubing manufacturer
Introduction
904L is a non-stabilised low carbon high alloy austenitic stainless steel. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids, particularly sulphuric acid. It is also highly resistant to chloride attack – both pitting / crevice corrosion and stress corrosion cracking.
This grade is non-magnetic in all conditions and has excellent weldability and formability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures.
904L does have very substantial contents of the high cost ingredients nickel and molybdenum. Many of the applications in which this grade has previously performed well can now be fulfilled at lower cost by duplex stainless steel 2205 (S31803 or S32205), so it is used less commonly than in the past.
stainless steel coil tube
stainless steel tube coil
stainless steel coil tubing
stainless steel coil pipe
stainless steel coil tube suppliers
stainless steel coil tube manufacturers
stainless steel pipe coil
Key Properties
These properties are specified for flat rolled product (plate, sheet and coil) in ASTM B625. Similar but not necessarily identical properties are specified for other products such as pipe, tube and bar in their respective specifications.
STAINLESS STEEL COIL TUBE SUPPLIERS
STAINLESS STEEL COIL TUBE MANUFACTURER IN CHINA, STAINLESS STEEL COIL TUBE 304, STAINLESS STEEL 304L COIL TUBE, STAINLESS STEEL COILED TUBING SUPPLIERS
316 STAINLESS STEEL COIL TUBING, STAINLESS STEEL 316L COIL TUBE DEALER, STAINLESS STEEL 201 COIL TUBES SUPPLIER, SS COIL TUBE EXPORTER, STAINLESS STEEL WELDED COIL TUBE, STEEL COIL TUBING
LIAOCHENG SIHE STAINLESS STEEL is privately owned Supplier of Stainless Steel Coil Tube, stainless steel welded pipe manufactured as per with national and international standards.We are also stockist and distributor of Stainless stee Seamless coil Tube and Stainless Steel Welded Coil Tube.LIAOCHENG SIHE STAINLESS STEEL has earned the status of preferred Stainless Steel Coil Tube manufacturer in China.Our Stainless Steel Coil Tubings is available in a variety of sizes and can be cut and polished to your specifications. We are well known supplier, stockist & distributor of Coil Tubingin a number of standard sizes and grades, including 304/304Land 316/316L Alloy 625 825 Lenght :800-3500M/COIL Coil stainless steel tubing widely used in the petrochemical, natural gas, oil and gas, and geothermal applications.Buy SS Coil tube best price in China.
Liaocheng sihe stainless steel material limited company is a leading manufacturer of wide size range & wall thickness in Inconel 625 Seamless Tubing for aerospace, chemical & Pharma industry. For high corrosion resistant applications Alloy 625 Welded tubing is the best option and used to manufacture Aircraft components. Alloy 625 exhaust tubing is useful material to manufacture high quality tubing for oil & gas, Food Processing as well power generation Industries.
▼STAINLESS STEEL COIL TUBE SPECIFICATION
- Standards: ASTM A269/A249 standard
- Grade: TP304, TP316L 304 316 310S 2205 825 625
- Out diameter:6.52-25.4mm
- 3.Trade Name : SS304 Coiled Tubes, SS316 Coiled Tubes, Duplex Coiled Tubes, Monel 400 Coiled Tubes, Hastelloy Coiled Tubes, Inconel coiled Tubes, 904L Coiled Tubes, Seamless Coiled Tubes, Welded Coiled Tubing
- Think:0.2-2MM
- Tolerance: OD± 0.1mm, wall thickness: ±10%, length: ±5mm
- 6.Length:300-3500M/coil
- packaging:iron pallet ,wooden pallet ,poly bag
- application : refrigeration equipment, evaporator, gas liquid delivery, condenser, beverage machine
- 4. state:soft / half hard / soft bright annealing
- 5. Specifications : outer diameter 6.52mm-20mm, wall thickness: 0.40mm-1.5mm
- Tolerance range: diameter: + 0.1mm, wall thickness: + 10%, length: -0/+6mm
- Length:800-3500M or according to customer requirements.
- Product advantages: surface polishing and fine, uniform wall thickness, tolerance precision etc..
- Commonly Size of stainless steel coiled tube: we can product them as your request.
| Stainless Steel Coil Tube Outside Diameter | 6.25MM-25.4mm |
| Stainless Steel Coil Tube Thickness | 0.2mm – 2mm |
| Stainless Steel Coil Tube Grades | TP – 304,304L,316,316L,201 ALLO 625 825 2205 ect |
| Stainless Steel Seamless Coil Tubing Specifications | ASTM A213 (average wall) and ASTM A269 |
| Stainless Steel Welded Coil Tubing Specifications | ASTM A249 and ASTM A269 |
Stainless Steel Coil Tube (WELDED AND SEAMLESS304/L OR 316/L)
At LIAOCHENG SIHE STAINLESS STEEL offers Stainless Steel Coil Tube in sizes from 6.35to 25.4 MM. and wall thickness from 0.2 to 2 . Generally, these SS Coil Tubing is available in lengths up to 3500m.Stainless steel tube straighteners make stainless steel coiled tubing installation faster and easier.We offer a comprehensive range of SS Coil Tubes to our customers in various industry verticals. According to the different applications, the Stainless Steel Seamless Coil Tubesavailable in different sizes. We can customize the ideal Stainless Steel Coil Tubingfor your unique application.Contact to LIAOCHENG SIHE STAINLESS STEEL for confirm availability and pricing.
As a largest stockholder of Stainless Steel Coil Tube, we have huge inventory of Stainless Steel 304 Coil Tube, Stainless Steel 304L Coil Tube,Stainless Steel 316 Coil Tube,Stainless steel 316L Coil Tube and stainless Steel 201 Coil Tube.
KEY BENEFITS OF STAINLESS STEEL COIL TUBING
Improved system safety and reliability – Stainless Steel Coil Tube restricted tolerance controls yield superior sealing performance.
Xtreme™ length – SS coil tube length up to 30% longer continuous length compared to competitive options
STAINLESS STEEL COIL TUBE MECHANICAL PROPERTIES
| Material | Heat | Temperure | Tensile Strength | Yield Strength | Elongation %, Min |
| Treatment | Min. | Ksi (MPa), Min. | Ksi (MPa), Min. | ||
| º F(º C) | |||||
| TP304 | Solution | 1900 (1040) | 75(515) | 30(205) | 35 |
| TP304L | Solution | 1900 (1040) | 70(485) | 25(170) | 35 |
| TP316 | Solution | 1900(1040) | 75(515) | 30(205) | 35 |
| TP316L | Solution | 1900(1040) | 70(485) | 25(170) | 35 |
▼Stainless steel coiled tubing /coiled tubes material grade:
|
U.S.A. |
GERMANY |
GERMANY |
FRANCE |
JAPAN |
ITALY |
SWEDEN |
U.K. |
E.U. |
SPAIN |
RUSSIA |
|
AISI |
DIN 17006 |
W.N. 17007 |
AFNOR |
JIS |
UNI |
SIS |
BSI |
EURONORM |
||
|
201 |
SUS 201 |
|||||||||
|
301 |
X 12 CrNi 17 7 |
1.4310 |
Z 12 CN 17-07 |
SUS 301 |
X 12 CrNi 1707 |
23 31 |
301S21 |
X 12 CrNi 17 7 |
X 12 CrNi 17-07 |
|
|
302 |
X 5 CrNi 18 7 |
1.4319 |
Z 10 CN 18-09 |
SUS 302 |
X 10 CrNi 1809 |
23 31 |
302S25 |
X 10 CrNi 18 9 |
X 10 CrNi 18-09 |
12KH18N9 |
|
303 |
X 10 CrNiS 18 9 |
1.4305 |
Z 10 CNF 18-09 |
SUS 303 |
X 10 CrNiS 1809 |
23 46 |
303S21 |
X 10 CrNiS 18 9 |
X 10 CrNiS 18-09 |
|
|
303 Se |
Z 10 CNF 18-09 |
SUS 303 Se |
X 10 CrNiS 1809 |
303S41 |
X 10 CrNiS 18-09 |
12KH18N10E |
||||
|
304 |
X 5 CrNi 18 10 X 5 CrNi 18 12 |
1.4301 1.4303 |
Z 6 CN 18-09 |
SUS 304 |
X 5 CrNi 1810 |
23 32 |
304S15 304S16 |
X 6 CrNi 18 10 |
X 6 CrNi 19-10 |
08KH18N10 06KH18N11 |
|
304 N |
SUS 304N1 |
X 5 CrNiN 1810 |
||||||||
|
304 H |
SUS F 304H |
X 8 CrNi 1910 |
X 6 CrNi 19-10 |
|||||||
|
304 L |
X 2 CrNi 18 11 |
1.4306 |
Z 2 CN 18-10 |
SUS 304L |
X 2 CrNi 1911 |
23 52 |
304S11 |
X 3 CrNi 18 10 |
X 2 CrNi 19-10 |
03KH18N11 |
|
X 2 CrNiN 18 10 |
1.4311 |
Z 2 CN 18-10-Az |
SUS 304LN |
X 2 CrNiN 1811 |
23 71 |
|||||
|
305 |
Z 8 CN 18-12 |
SUS 305 |
X 8 CrNi 1812 |
23 33 |
305S19 |
X 8 CrNi 18 12 |
X 8 CrNi 18-12 |
|||
|
Z 6 CNU 18-10 |
SUS XM7 |
X 6 CrNiCu 18 10 4 Kd |
||||||||
|
309 |
X 15 CrNiS 20 12 |
1.4828 |
Z 15 CN 24-13 |
SUH 309 |
X 16 CrNi 2314 |
309S24 |
X 15 CrNi 23 13 |
|||
|
309 S |
SUS 309S |
X 6 CrNi 2314 |
X 6 CrNi 22 13 |
|||||||
|
310 |
X 12 CrNi 25 21 |
1.4845 |
SUH 310 |
X 22 CrNi 2520 |
310S24 |
20KH23N18 |
||||
|
310 S |
X 12 CrNi 25 20 |
1.4842 |
Z 12 CN 25-20 |
SUS 310S |
X 5 CrNi 2520 |
23 61 |
X 6 CrNi 25 20 |
10KH23N18 |
||
|
314 |
X 15 CrNiSi 25 20 |
1.4841 |
Z 12 CNS 25-20 |
X 16 CrNiSi 2520 |
X 15 CrNiSi 25 20 |
20KH25N20S2 |
||||
|
316 |
X 5 CrNiMo 17 12 2 |
1.4401 |
Z 6 CND 17-11 |
SUS 316 |
X 5 CrNiMo 1712 |
23 47 |
316S31 |
X 6 CrNiMo 17 12 2 |
X 6 CrNiMo 17-12-03 |
|
|
316 |
X 5 CrNiMo 17 13 3 |
1.4436 |
Z 6 CND 17-12 |
SUS 316 |
X 5 CrNiMo 1713 |
23 43 |
316S33 |
X 6 CrNiMo 17 13 3 |
X 6 CrNiMo 17-12-03 |
|
|
316 F |
X 12 CrNiMoS 18 11 |
1.4427 |
||||||||
|
316 N |
SUS 316N |
|||||||||
|
316 H |
SUS F 316H |
X 8 CrNiMo 1712 |
X 5 CrNiMo 17-12 |
|||||||
|
316 H |
X 8 CrNiMo 1713 |
X 6 CrNiMo 17-12-03 |
||||||||
|
316 L |
X 2 CrNiMo 17 13 2 |
1.4404 |
Z 2 CND 17-12 |
SUS 316L |
X 2 CrNiMo 1712 |
23 48 |
316S11 |
X 3 CrNiMo 17 12 2 |
X 2 CrNiMo 17-12-03 |
03KH17N14M2 |
|
X 2 CrNiMoN 17 12 2 |
1.4406 |
Z 2 CND 17-12-Az |
SUS 316LN |
X 2 CrNiMoN 1712 |
||||||
|
316 L |
X 2 CrNiMo 18 14 3 |
1.4435 |
Z 2 CND 17-13 |
X 2 CrNiMo 1713 |
23 53 |
316S13 |
X 3 CrNiMo 17 13 3 |
X 2 CrNiMo 17-12-03 |
03KH16N15M3 |
|
|
X 2 CrNiMoN 17 13 3 |
1.4429 |
Z 2 CND 17-13-Az |
X 2 CrNiMoN 1713 |
23 75 |
||||||
|
X 6 CrNiMoTi 17 12 2 |
1.4571 |
Z6 CNDT 17-12 |
X 6 CrNiMoTi 1712 |
23 50 |
320S31 |
X 6 CrNiMoTi 17 12 2 |
X 6 CrNiMoTi 17-12-03 |
08KH17N13M2T 10KH17N13M2T |
||
|
X 10 CrNiMoTi 18 12 |
1.4573 |
X 6 CrNiMoTi 1713 |
320S33 |
X 6 CrNiMoTI 17 13 3 |
X 6 CrNiMoTi 17-12-03 |
08KH17N13M2T 10KH17N13M2T |
||||
|
X 6 CrNiMoNb 17 12 2 |
1.4580 |
Z 6 CNDNb 17-12 |
X 6 CrNiMoNb 1712 |
X 6 CrNiMoNb 17 12 2 |
08KH16N13M2B |
|||||
|
X 10 CrNiMoNb 18 12 |
1.4583 |
X 6 CrNiMoNb 1713 |
X 6 CrNiMoNb 17 13 3 |
09KH16N15M3B |
||||||
|
317 |
SUS 317 |
X 5 CrNiMo 1815 |
23 66 |
317S16 |
||||||
|
317 L |
X 2 CrNiMo 18 16 4 |
1.4438 |
Z 2 CND 19-15 |
SUS 317L |
X 2 CrNiMo 1815 |
23 67 |
317S12 |
X 3 CrNiMo 18 16 4 |
||
|
317 L |
X 2 CrNiMo 18 16 4 |
1.4438 |
Z 2 CND 19-15 |
SUS 317L |
X 2 CrNiMo 1816 |
23 67 |
317S12 |
X 3 CrNiMo 18 16 4 |
||
|
330 |
X 12 NiCrSi 36 16 |
1.4864 |
Z 12NCS 35-16 |
SUH 330 |
||||||
|
321 |
X 6 CrNiTi 18 10 X 12 CrNiTi 18 9 |
1.4541 1.4878 |
Z 6 CNT 18-10 |
SUS 321 |
X 6 CrNiTi 1811 |
23 37 |
321S31 |
X 6 CrNiTi 18 10 |
X 6 CrNiTi 18-11 |
08KH18N10T |
|
321 H |
SUS 321H |
X 8 CrNiTi 1811 |
321S20 |
X 7 CrNiTi 18-11 |
12KH18N10T |
|||||
|
329 |
X 8 CrNiMo 27 5 |
1.4460 |
SUS 329J1 |
23 24 |
||||||
|
347 |
X 6 CrNiNb 18 10 |
1.4550 |
Z 6 CNNb 18-10 |
SUS 347 |
X 6 CrNiNb 1811 |
23 38 |
347S31 |
X 6 CrNiNb 18 10 |
X 6 CrNiNb 18-11 |
08KH18N12B |
|
347 H |
SUS F 347H |
X 8 CrNiNb 1811 |
X 7 CrNiNb 18-11 |
|||||||
|
904L |
1.4939 |
Z 12 CNDV 12-02 |
||||||||
|
X 20 CrNiSi 25 4 |
1.4821 |
|||||||||
|
UNS31803 |
X 2 CrNiMoN 22 5 |
1.4462 |
||||||||
|
UNS32760 |
X 3 CrNiMoN 25 7 |
1.4501 |
Z 3 CND 25-06Az |
|||||||
|
403 |
X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 |
1.4000 1.4006 1.4024 |
Z 12 C 13 |
SUS 403 |
X 12 Cr 13 |
23 02 |
403S17 |
X 10 Cr 13 X 12 Cr 13 |
X 6 Cr 13 |
12Kh13 |
|
405 |
X 6 CrAl 13 |
1.4002 |
Z 6 CA 13 |
SUS 405 |
X 6 CrAl 13 |
405S17 |
X 6 CrAl 13 |
X 6 CrAl 13 |
||
|
X 10 CrAl 7 |
1.4713 |
Z 8 CA 7 |
X 10 CrAl 7 |
|||||||
|
X 10 CrAl 13 |
1.4724 |
X 10 CrAl 12 |
10Kh13SYu |
|||||||
|
X 10 CrAl 18 |
1.4742 |
X 10 CrSiAl 18 |
15Kh18SYu |
|||||||
|
409 |
X 6 CrTi 12 |
1.4512 |
Z 6 CT 12 |
SUH 409 |
X 6 CrTi 12 |
409S19 |
X 5 CrTi 12 |
|||
|
X 2 CrTi 12 |
||||||||||
|
410 |
X 6 Cr 13 X 10 Cr 13 X 15 Cr 13 |
1.4000 1.4006 1.4024 |
Z 10 C 13 Z 12 C 13 |
SUS 410 |
X 12 Cr 13 |
23 02 |
410S21 |
X 12 Cr 13 |
X 12 Cr 13 |
12Kh13 |
|
410 S |
X 6 Cr 13 |
1.4000 |
Z 6 C 13 |
SUS 410S |
X 6 Cr 13 |
23 01 |
403S17 |
X 6 Cr 13 |
08Kh13 |
▼Size of Stainless steel Coil Tube
|
ITEM |
Grade |
Size |
Pressure |
Length |
|
1 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.025″ |
3200 |
500-2000 |
|
2 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.035″ |
3200 |
500-2000 |
|
3 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.035″ |
2000 |
500-2000 |
|
4 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.049″ |
2000 |
500-2000 |
|
5 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.035″ |
1500 |
500-2000 |
|
6 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.049″ |
1500 |
500-2000 |
|
7 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.049″ |
1000 |
500-2000 |
|
8 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.065″ |
1000 |
500-2000 |
|
9 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.7mm |
3200 |
500-2000 |
|
10 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.9mm |
3200 |
500-2000 |
|
11 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×0.9mm |
3000 |
500-2000 |
|
12 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×1.1mm |
3000 |
500-2000 |
|
13 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×0.9mm |
2000 |
500-2000 |
|
14 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×1.1mm |
2000 |
500-2000 |
|
15 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1mm |
1800 |
500-2000 |
|
16 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1.2mm |
1800 |
500-2000 |
|
17 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1mm |
1500 |
500-2000 |
|
18 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1.2mm |
1500 |
500-2000 |
|
19 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×2mm |
500 |
500-2000 |
|
20 |
316L、304L、304 alloy 625 825 2205 2507 |
φ12mm×1.5mm |
500 |
500-2000 |
▼Stainless steel coiled tube coiled tubing stock range
|
Item |
O.D (mm) |
3.0-4.0 |
4.01-6.00 |
6.01-8.00 |
8.01-10.0 |
10.01-12.7 |
12.71-19.05 |
19.05-25.4 |
| W.T (mm) | ||||||||
|
Stainless Steel Coiled Tubes/ Coil Tubing |
0.30-0.40 |
√ |
√ |
√ |
|
|||
|
Stainless Steel Coiled Tubes/ Coil Tubing |
0.41-0.50 |
√ |
√ |
√ |
√ |
|
||
|
Stainless Steel Coiled Tubes/ Coil Tubing |
0.51-0.60 |
√ |
√ |
√ |
√ |
√ |
|
|
|
Stainless Steel Coiled Tubes/ Coil Tubing |
0.61-0.70 |
√ |
√ |
√ |
√ |
√ |
√ |
|
|
Stainless Steel Coiled Tubes/ Coil Tubing |
0.71-1.00 |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
|
Stainless Steel Coiled Tubes/ Coil Tubing |
1.01-1.20 |
√ |
√ |
√ |
√ |
√ |
√ |
|
|
Stainless Steel Coiled Tubes/ Coil Tubing |
1.21-1.50 |
√ |
√ |
√ |
√ |
|||
|
Stainless Steel Coiled Tubes/ Coil Tubing |
1.51-2.0 |
|
|
|
|
√ |
√ |
√ |
▼Our advantages:
We are a stainless steel coiled tube/pipe manufacturer.
We can control the quality of pipe by ourselves.
The length of the pipes is more than 3500M/Coil.
▼Description:
Our company has three production line of stainless steel coiled tube ,stainless steel pipe ,we have exporting experience for more than ten years ,the bending, stretching, saw cutting, stamping, polishing and so on a series of processing equipment , our stainless steel product widely used in bathroom pendant, hanger accessories, hardware, and condensation water heating equipment, hotel supplies and so on. our company sincerely hope that domestic and foreign customers to provide drawings or samples.
We have experience to export stainless steel tube products for more than ten years.
Description: Liaocheng sihe stainless steel material Limited company production of stainless
steel coil has ten years of history, has two production lines can produce continuous welded pipe, equipment is perfect, the technology leader. But the company introduced the world first-class bright annealing technology, can online stainless steel pipe softening treatment. In addition, we also have compressed, flaring, bending test, hardness 100%, stretch, air tightness test and so on, the price is reasonable, quality is reliable, the current US 80% coil export to all over the world.
▼Seamless coiled tubing is a no. 1 choice in most of the critical applications as there is no risk of impurities that are often associated with welded coiled tubing.
- Made available in custom lengths
- Improved system safety and reliability
- Greater corrosion resistance
- Reduces the use of fittings, preventing the possibilities of leaks and other long-term failures
- Reduced installation costs – installation involves less time and efforts
▼STAINLESSS STEEL COILED TUBES /COILED TUBING APPLICATION
- Food & Beverage Industry
- Petrochemical
- CNG Piping Jobs
- Boilers
- Desalination Plants
- Geothermal Plants
- Heat Exchangers
- Instrumentation Jobs
- Mechanical Jobs
- Oil and Gas Equipments and Piping Works
AVAILABLE STOCK OF SS COIL TUBE
| Stainless Steel Tubing Coil 3/4 Manufacturer in China | Stainless Steel Tubing Coil 1/4 Manufacturer in China |
| 1′ Stainless Steel Coil Tubing Suppliers | Stainless Steel Tubing Coil 1/2 Exporter |
| stainless steel tube coil heat exchanger | stainless steel tube coil suppliers |
| Stainless Steel 304 Seamless Coil Tubing suppliers | Stainless Steel 316 Seamless Coil Tubing suppliers |
| 316 Stainless Steel Coil Tubing Manufacturer in China | stainless steel cooling coil tube supplier |
| SS 304 Coil Tube Suppliers | SS 316L Coil Tube Manufacturer in China |
| SS 316 Coil Tube Suppliers | Stainless Steel Welded Coil Tube Suppliers |
| Stainless Steel Seamless Coil Tube Supplier | SS Seamless Coil Tube Supplier |
| Stainless Steel Coil Tubing Supplier | Coil Stainless Steel Tubing Supplier |
| Stainless Steel Coil Tube Supplier | Stainless Steel Coil Tube Exporter |
| 304 Stainless Steel Coil Tube Manufacturer in China | SS 316L Coil Tube Manufacturer in China |
| Stainless Steel Coil Tube Size Chart | Stainless Steel Coil Tubing for Sale |
| Stainless Steel Bright Annealed Coil Tube | 304L Stainless Steel Coil Tube Manufacturer |
| Stainless Steel 201 Coil Tubes Supplier | Stainless Steel Coil 316 Tube Supplier |
| 3/8 stainless steel tubing coil Manufacturer in China | Stainless Steel Coil Tube 304 Manufacturer in China |
| SS Coil Tube Manufacturer in India | 316 Stainless Steel Coil Tube Supplier |
| Hot Rolled Stainless Steel Coil Tube supplier | 316L Stainless Steel Coil Tube Supplier |
| 2 Stainless Steel Coil Tube Manufacturer in China | 201 Stainless Steel Coil Tube Manufacturer in China |
| 1/2 o.d. x 50′ Stainless Steel Coil Tube Supplier | SS 316 Coil Tube Manufacturer in China |
| food grade stainless steel tubing coil Supplier | Schedule 40 Stainless Steel Coil Tube Supplier |
| 1/2 inch stainless steel coil tubing Supplier | Schedule 80 Stainless Steel Coil Tube Supplier |
| 1/4 inch stainless steel coil tubing Supplier | Schedule 10 Stainless Steel Coil Tube Supplier |
| 3/4 inch stainless steel tubing coil Supplier | Sch 5 Stainless Steel Coil Tube Supplier |
| 1/2 od stainless steel tubing coil Supplier | Stainless Steel Welded Coil Tube Manufacturer |
| 15/16 stainless steel tubing coil Supplier | 1/16 stainless steel tubing coil |
| 13/16 stainless steel tubing coil Supplier | SS 304L Coil Tube Suppliers |
Related products
-
ASTM A249 904 Stainless steel coiled tubes and ...
Introduction stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube suppliers stainless steel coil tube manufacturers stainless steel pipe coil 904L is a non-stabilised low carbon high alloy austenitic stainless steel. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids, particularly sulphuric acid. It is also highly resistant to chloride attack – both pitting / cr...
-
904L Stainless steel coiled tubeing
STAINLESS STEEL COIL TUBE SUPPLIERS STAINLESS STEEL COIL TUBE MANUFACTURER IN CHINA, STAINLESS STEEL COIL TUBE 304, STAINLESS STEEL 304L COIL TUBE, STAINLESS STEEL COILED TUBING SUPPLIERS 304 Stainless Steel Chemical Composition Grade C Mn Si P S Cr Mo Ni N 304 min. – – – – – 18.0 – 8.0 – max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10 Stainless Steel 304 Mechanical Properties Grade Tensile Str...
