Cheap PriceList for Steam Air Heat Exchanger For Textile Dyers Equipments - 304 stainless steel capillary tubing – Sihe
Cheap PriceList for Steam Air Heat Exchanger For Textile Dyers Equipments - 304 stainless steel capillary tubing – Sihe Detail:
Manufacturing range:
Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to requests
Capillary tubes with a maximum bore of 0.0158 in., available in a wide range of stainless steels. Sandvik capillary tubes are characterized by tight tolerances, and the inside surface of the tubes is free from oil, grease and other particles. This ensures, for example, an optimized and even flow of liquids and gases from the sensor to the measuring instrument.
Stainless steel Coiled tubing is available in a range of different product forms depending on the customer requirements. Licancheng sihe stainless steel material manufactures welded and seamless tube products. The standard grades are 304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) Other grades of stainless steel in duplex and superduplex and nickel alloy are available on request.
Diameter from 3mm (0.118’’) to 25.4mm (1.00’’) OD. Wall thickness from 0.5mm (0.020’’) to 3mm (0.118’’).Tubing can be supplied in the annealed or cold worked stainless steel control line pipe condition.
Specification
- Production standards: ASTM A269/A249, standard
- stainless steel material :304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625)
3. Size range: diameter 3MM(0.118”-25.4(1.0”)MM
4. Wall thicknesses: 0.5mm (0.020’’) to 3mm (0.118’’)
5.General delivery pipe status: half hard / soft bright annealing
6.The tolerance range: diameter: + 0.1mm, wall thickness: + 10%, length: -0/+6mm
7.Annual output: 600 tons
8.Coil lengthsup to: 500MM-13500MM (45000feet)(can be adjusted according to customer requirements)
Commonly Size of stainless steel coiled tube: we can product them as your request.
|
Size of Stainless steel Coil Tube |
||||||||||||||||
|
ITEM |
Grade |
Size |
Pressure |
Length |
||||||||||||
|
1 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.025″ |
3200 |
500-35000 |
||||||||||||
|
2 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.035″ |
3200 |
500-35000 |
||||||||||||
|
3 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.035″ |
2000 |
500-35000 |
||||||||||||
|
4 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.049″ |
2000 |
500-35000 |
||||||||||||
|
5 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.035″ |
1500 |
500-35000 |
||||||||||||
|
6 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.049″ |
1500 |
500-35000 |
||||||||||||
|
7 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.049″ |
1000 |
500-35000 |
||||||||||||
|
8 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.065″ |
1000 |
500-35000 |
||||||||||||
|
9 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.7mm |
3200 |
500-35000 |
||||||||||||
|
10 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.9mm |
3200 |
500-35000 |
||||||||||||
|
11 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×0.9mm |
3000 |
500-35000 |
||||||||||||
|
12 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×1.1mm |
3000 |
500-35000 |
||||||||||||
|
13 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×0.9mm |
2000 |
500-35000 |
||||||||||||
|
14 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×1.1mm |
2000 |
500-35000 |
||||||||||||
|
15 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1mm |
1800 |
500-35000 |
||||||||||||
|
16 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1.2mm |
1800 |
500-35000 |
||||||||||||
|
17 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1mm |
1500 |
500-35000 |
||||||||||||
|
18 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1.2mm |
1500 |
500-35000 |
||||||||||||
|
19 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×2mm |
500 |
500-35000 |
||||||||||||
|
20 |
316L、304L、304 alloy 625 825 2205 2507 |
φ12mm×1.5mm |
500 |
500-35000 |
||||||||||||
|
Pressure tables |
||||||||||||||||
|
Selection of the appropriate material for any given control or chemical injection line is subject to the prevailing operational and site conditions. In order to assist in the selection, the following tables provide internal pressure ratings and the adjustments factors for a range of common grades and sizes of seamless and laser welded stainless tubing. |
||||||||||||||||
|
Maximum pressure (P) for TP 316L at 100°F (38°C)1) |
||||||||||||||||
|
Please refer to grade and product form adjustment factors below. |
||||||||||||||||
|
Outside diameter, in. |
Wall thickness, in. |
Working pressure2) |
Burst pressure2) |
Collapse pressure4) |
||||||||||||
|
psi (MPa) |
psi (MPa) |
psi (MPa) |
||||||||||||||
|
1/4 |
0.035 |
6,600 (46) |
22,470 (155) |
6,600 (46) |
||||||||||||
|
1/4 |
0.049 |
9,260 (64) |
27,400 (189) |
8,710 (60) |
||||||||||||
|
1/4 |
0.065 |
12,280 (85) |
34,640 (239) |
10,750 (74) |
||||||||||||
|
3/8 |
0.035 |
4,410 (30) |
19,160 (132) |
4,610 (32) |
||||||||||||
|
3/8 |
0.049 |
6,170 (43) |
21,750 (150) |
6,220 (43) |
||||||||||||
|
3/8 |
0.065 |
8,190 (56) |
25,260 (174) |
7,900 (54) |
||||||||||||
|
3/8 |
0.083 |
10,450 (72) |
30,050 (207) |
9,570 (66) |
||||||||||||
|
1/2 |
0.049 |
4,630 (32) |
19,460 (134) |
4,820 (33) |
||||||||||||
|
1/2 |
0.065 |
6,140 (42) |
21,700 (150) |
6,200 (43) |
||||||||||||
|
1/2 |
0.083 |
7,840 (54) |
24,600 (170) |
7,620 (53) |
||||||||||||
|
5/8 |
0.049 |
3,700 (26) |
18,230 (126) |
3,930 (27) |
||||||||||||
|
5/8 |
0.065 |
4,900 (34) |
19,860 (137) |
5,090 (35) |
||||||||||||
|
5/8 |
0.083 |
6,270 (43) |
26,910 (151) |
6,310 (44) |
||||||||||||
|
3/4 |
0.049 |
3,080 (21) |
17,470 (120) |
3,320 (23) |
||||||||||||
|
3/4 |
0.065 |
4,090 (28) |
18,740 (129) |
4,310 (30) |
||||||||||||
|
3/4 |
0.083 |
5,220 (36) |
20,310 (140) |
5,380 (37) |
||||||||||||
|
1) Estimates only. Actual pressures should be calculated considering all stress factors in the system. |
||||||||||||||||
|
2) Based on calculations from API 5C3, using a wall tolerance of +/-10% |
||||||||||||||||
|
3) Based on ultimate strength burst calculations from API 5C3 |
||||||||||||||||
|
4) Based on yield strength collapse calculations from API 5C3 |
||||||||||||||||
|
Adjustment factors for working pressure limits1) |
||||||||||||||||
|
Pw = reference working pressure rating for TP 316L at 100°F (38°C). To determine working pressure for grade/temperature combination, multiply Pw by adjustment factor. |
||||||||||||||||
|
Grade |
100°F |
200°F |
300°F |
400°F |
||||||||||||
|
(38°C) |
(93°C) |
(149°C) |
(204°C) |
|||||||||||||
|
TP 316L, seamless |
1 |
0.87 |
0.7 |
0.63 |
||||||||||||
|
TP 316L, welded |
0.85 |
0.74 |
0.6 |
0.54 |
||||||||||||
|
Alloy 825, seamless |
1.33 |
1.17 |
1.1 |
1.03 |
||||||||||||
|
Alloy 825, welded |
1.13 |
1.99 |
1.94 |
0.88 |
||||||||||||
|
1) Adjustment factors based on allowable stress in ASME. |
||||||||||||||||
|
Adjustment factors for burst pressure limits1) |
||||||||||||||||
|
Pb = reference burst pressure for TP 316L at 100°F. To determine burst pressure for grade/temperature combination, multiply Pb by adjustment factor. |
||||||||||||||||
|
Grade |
100°F |
200°F |
300°F |
400°F |
||||||||||||
|
(38°C) |
(93°C) |
(149°C) |
(204°C) |
|||||||||||||
|
TP 316L, seamless |
1 |
0.93 |
0.87 |
0.8 |
||||||||||||
|
TP 316L, welded |
0.85 |
0.79 |
0.74 |
0.68 |
||||||||||||
|
Alloy 825, seamless |
1.13 |
1.07 |
1 |
0.87 |
||||||||||||
|
Alloy 825, welded |
0.96 |
0.91 |
0.85 |
0.74 |
||||||||||||
|
1) Adjustment factors based on ultimate strength in ASME. |
||||||||||||||||
Chemical composition:
|
316 Stainless steel capillary tube |
|||||||||
| Grade | UNS | C | Cr | Ni | Mo | Others | |||
| max. | |||||||||
|
TP 316L |
S31600/ S31603 |
0.03 |
17.5 |
13 |
2.1 |
0.1 |
|||
| Mechanical properties | |||||||||
| Grade |
Yield strength, |
Tensile strength, |
Elongation |
||||||
|
psi (MPa) |
psi (MPa) |
% |
|||||||
| TP 316L |
32,000 (220) |
75,000 (515) |
35 |
||||||
| Corrosion properties | |||||||||
|
Grade |
UNS |
PRE1) |
CPT2) F (oC) |
Max H2S3) |
CO24) |
||||
|
TP 316L |
S31600/S31603 |
24 |
95 (35) |
No limit |
+ |
||||
Quality advantage:
The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:
1.Non-destructive tests
2. Hydrostatic tests
3.Surface finish controls
4. Dimensional accuracy measurements
5.Flare and coning tests
6. Mechanical and chemical property testing
Stainless steel coil tube Application:
- refrigeration equipment
- evaporator,
- gas liquid delivery
- Condenser
- beverage machine.
Product detail pictures:
Related Product Guide:
Central Nervous System Inflammation and Infection during Early, Nonaccelerated Simian-Human Immunodeficiency Virus Infection in Rhesus Macaques | 304l Stainless Steel Capillary Tube
Heat-conducting polymer cools hot electronic devices at 200 degrees Celsius | 304l Stainless Steel Capillary Tube
Persisting in "High quality, Prompt Delivery, Aggressive Price", now we have established long-term cooperation with consumers from equally overseas and domestically and get new and old clients' large comments for Cheap PriceList for Steam Air Heat Exchanger For Textile Dyers Equipments - 304 stainless steel capillary tubing – Sihe , The product will supply to all over the world, such as: Hyderabad, Honduras, Cyprus, With many years good service and development, we've a professional international trade sales team. Our products have exported to North America, Europe, Japan, Korea, Australia, New Zealand, Russia and other countries. Looking forward to build up a good and long term cooperation with you in coming future!
By Chris from Japan - 2015.06.26 19:27
We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
By Jerry from Benin - 2015.09.12 17:18
Related products
-
OEM/ODM Manufacturer Seamless Stainless Steel P...
To create far more benefit for customers is our company philosophy; customer growing is our working chase for Best-Selling China Stainless Steel Coil Pipe Tube Tubing Control Tubing Line 316L 304L, We’re very proud of your fantastic popularity from our prospects for our products’ reputable quality. To create far more benefit for customers is our company philosophy; customer growing is our working chase for China Pipe, Tube, Welcome any of your inquiries and concerns for our produc...
-
Factory For Ss 304 Capillary Tube - Original F...
We usually continually offer you the most conscientious consumer services, along with the widest variety of designs and styles with finest materials. These initiatives include the availability of customized designs with speed and dispatch for Original Factory China Coiled Tubing Unit with 2″ for Oilfield, We are going to hold doing work hard and as we try out our greatest to source the most beneficial quality products and solutions, most competitive selling price and outstanding service...
-
18 Years Factory Sa269 Stainless Steel Seamless...
★ASTM A269 alloy 825 stainless steel coil tubing pipe suppliers Super alloys have the ability to function at very high temperatures and mechanical stress, and also where high surface stability is required. They have good creep and oxidation resistance, and can be produced in a variety of shapes. They can be strengthened by solid-solution hardening, work hardening, and precipitation hardening. Super alloys consist of a number of elements in a variety of combinations to achieve the desired resu...
-
Manufacturer for Stainless Steel Tube Heat Exch...
JIS DIN alloy 825 Stainless steel Precision pipe Standard:ASTM A-312、ASTM A-269、ASTM A-632、ASTM A-213 DIN 17458、DIN17456 JIS G3463、JIS G3459、JIS G3448 Material Grade:201/202/304/316 Outer Diameter:0.1mm–8mm Thickness:0.05mm – 2.1mm Length:2440mm, 3050mm, 5800mm, 6000mm, 6100mm or as customer request Tolerance:a) Outer Diameter: +/- 0.2mm b) Thickness: +/- 10% OR as customer request c) Length: +/- 10mm Surface:Satin / Hairline :180#, 320# Polish : 400# ,600# ,800# or Mir...
-
Factory Free sample Erw Welded Stainless Steel ...
Manufacturing range: stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube suppliers stainless steel coil tube manufacturers stainless steel pipe coil Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to re...
-
Wholesale Dealers of Api 5l X 52 Carbon Steel P...
201 stainless steel polishing tube: Specification: Item:stainless steel welded polishing pipe Type:welded Standard:ASTM A554 JIS ,DIN Grade:201,202, 304, 304L,316, 316L,409, 430,etc Size:Round pipe:OD 8-219m Square Pipe: OD 10x10mm -150x150mm Rectangle Pipe:10x20mm to 120x180mm Thickness:0.2-4.0mm Pipe surface:180G, 320G, 400G, 500G, 600G,Satin, hairline, 2B,BA, mirror,8K Pipe length:5.8m 6M 11.85M 12m Application: 1.Decoration usage(road,bridge handrail,railing,bus stop,airport and gym 2.Co...
