Factory Cheap Hot 316 Stainless Steel Cooling Coil Tube - Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304 – Sihe
Factory Cheap Hot 316 Stainless Steel Cooling Coil Tube - Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304 – Sihe Detail:
We insist around the principle of enhancement of ‘High good quality, Performance, Sincerity and Down-to-earth working approach’ to provide you with superb assistance of processing for Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304, We are going to endeavor to maintain our great status as the very best solutions supplier in the earth. When you have any questions or opinions, be sure to contact with us freely.
We insist around the principle of enhancement of ‘High good quality, Performance, Sincerity and Down-to-earth working approach’ to provide you with superb assistance of processing for 304 Stainless Steel Plate, 304 Stainless Steel Sheet, We are going to not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced merchandise constantly to satisfactorily meet the needs of our clients all over the world.
Stainless steel sheet
Thickness: 10mm-100mm & 0.3mm-2mm
Width: 1.2m, 1.5m or as per request
Technique: Cold rolled or hot rolled
Surface treatment: Polished or as requirement
Application:
Steel sheet applies to construction field, ships building industry, petroleum& chemical industries, war and electricity industries, food processing and boiler heat exchanger machinery and hardware fields etc.
Quality standard: GB 3274-2007 or equivalent to ASTM/JIS/DIN/BS etc
Steel grade:
200, 300, 400 series
( 201, 202, 304, 304L, 309S, 310S, 316, 316L, 317L, 321, 347H, 409410S, 420, 430, etc)
Type: Steel plate
Special use: High-strength steel plate
If you need, pls contact with me freely. Your response will be highly appreciated.
1. Chemical Requirements
pecification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max. | |||||||
JIS | SUS301 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | |||
G4303 | SUS302 | 0.15 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | |||
G4304 | SUS304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.50 | |||
G4305 | SUS304L | 0.03 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 9.00-13.00 | |||
G4312 | SUS304J3 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.50 | Cu:1.00-3.00 | ||
SUH309 | 0.2 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUS309S | 0.08 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUH310 | 0.25 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS310S | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS316 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | |||
SUS316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | |||
SUS317 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | |||
SUS321 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | 5*C Min. | |||
SUS347 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Nb:10*C Min. | |||
SUSXM7 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.50-10.50 | Cu:3.00-4.00 | |||
SUH409 | 0.08 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUH409L | 0.03 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUS410 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | |||||
SUS420J1 | 0.16-0.25 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS420J2 | 0.26-0.40 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS430 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | 16.00-18.00 | |||||
SUS434 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75~1.25 | ||||
ASTM Specification | |||||||||||
Specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max | |||||||
ASTM | S30100 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | N:0.10 Max | ||
A240 | S30200 | 0.15 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | N:0.10 Max | ||
S30400 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.5 | N:0.10 Max | |||
S30403 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-12.00 | N:0.10 Max | |||
S30908 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
S31008 | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
S31600 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31603 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | N:0.10 Max | ||
S32100 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-12.00 | 5*(C+N) Min. | N:0.10 Max | ||
0.70 Max | |||||||||||
S34700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Cb:10*CM in. | |||
1.00 Max | |||||||||||
S40910 | 0.03 | 1 | 1 | 0.045 | 0.03 | 10.50-11.70 | 0.5Max | Ti:6*CMin. | |||
0.5 Max. | |||||||||||
S41000 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | 0.75Max | ||||
S43000 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75Max |
Surface for stainless steel :
Our warehouse:
Product detail pictures:
Related Product Guide:
DVO Sapphire Forks and Topaz Air Shock – Core Bike 2016 | 304 Stainless Steel Capillary Tube
Suzuki Introduces New Street, Cruiser, Dual Sport And Scooter Models | Stainless Steel Pipe 304
Our aim would be to fulfill our shoppers by offering golden company, very good value and good quality for Factory Cheap Hot 316 Stainless Steel Cooling Coil Tube - Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304 – Sihe , The product will supply to all over the world, such as: Gambia, Liberia, Denmark, With strong technical strength and advanced production equipment, and SMS people purposefully , professional, dedicated spirit of enterprise. Enterprises took the lead through the ISO 9001:2008 international quality management system certification, CE certification EU ; CCC.SGS.CQC other related product certification. We look forward to reactivating our company connection.
By Miriam from Doha - 2015.09.29 17:23
Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
By Alexander from Monaco - 2016.06.22 12:49