Good Quality Ss316l 6 Inch Welded Stainless Steel Pipe - Ncoloy 825 (UNS N08825) stainless steel capillary tubings – Sihe
Good Quality Ss316l 6 Inch Welded Stainless Steel Pipe - Ncoloy 825 (UNS N08825) stainless steel capillary tubings – Sihe Detail:
Manufacturing range:
Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to requests
Capillary tubes with a maximum bore of 0.0158 in., available in a wide range of stainless steels. Sandvik capillary tubes are characterized by tight tolerances, and the inside surface of the tubes is free from oil, grease and other particles. This ensures, for example, an optimized and even flow of liquids and gases from the sensor to the measuring instrument.
Stainless steel Coiled tubing is available in a range of different product forms depending on the customer requirements. Licancheng sihe stainless steel material manufactures welded and seamless tube products. The standard grades are 304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) Other grades of stainless steel in duplex and superduplex and nickel alloy are available on request.
Diameter from 3mm (0.118’’) to 25.4mm (1.00’’) OD. Wall thickness from 0.5mm (0.020’’) to 3mm (0.118’’).Tubing can be supplied in the annealed or cold worked stainless steel control line pipe condition.
Specification
- Production standards: ASTM A269/A249, standard
- stainless steel material :304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625)
3. Size range: diameter 3MM(0.118”-25.4(1.0”)MM
4. Wall thicknesses: 0.5mm (0.020’’) to 3mm (0.118’’)
5.General delivery pipe status: half hard / soft bright annealing
6.The tolerance range: diameter: + 0.1mm, wall thickness: + 10%, length: -0/+6mm
7.Annual output: 600 tons
8.Coil lengthsup to: 500MM-13500MM (45000feet)(can be adjusted according to customer requirements)
2. Commonly Size of stainless steel coiled tube: we can product them as your request.
|
Size of Stainless steel Coil Tube |
||||||||||||||||
|
ITEM |
Grade |
Size |
Pressure |
Length |
||||||||||||
|
1 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.025″ |
3200 |
500-35000 |
||||||||||||
|
2 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.035″ |
3200 |
500-35000 |
||||||||||||
|
3 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.035″ |
2000 |
500-35000 |
||||||||||||
|
4 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.049″ |
2000 |
500-35000 |
||||||||||||
|
5 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.035″ |
1500 |
500-35000 |
||||||||||||
|
6 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.049″ |
1500 |
500-35000 |
||||||||||||
|
7 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.049″ |
1000 |
500-35000 |
||||||||||||
|
8 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.065″ |
1000 |
500-35000 |
||||||||||||
|
9 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.7mm |
3200 |
500-35000 |
||||||||||||
|
10 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.9mm |
3200 |
500-35000 |
||||||||||||
|
11 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×0.9mm |
3000 |
500-35000 |
||||||||||||
|
12 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×1.1mm |
3000 |
500-35000 |
||||||||||||
|
13 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×0.9mm |
2000 |
500-35000 |
||||||||||||
|
14 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×1.1mm |
2000 |
500-35000 |
||||||||||||
|
15 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1mm |
1800 |
500-35000 |
||||||||||||
|
16 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1.2mm |
1800 |
500-35000 |
||||||||||||
|
17 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1mm |
1500 |
500-35000 |
||||||||||||
|
18 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1.2mm |
1500 |
500-35000 |
||||||||||||
|
19 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×2mm |
500 |
500-35000 |
||||||||||||
|
20 |
316L、304L、304 alloy 625 825 2205 2507 |
φ12mm×1.5mm |
500 |
500-35000 |
||||||||||||
| Pressure tables | ||||||||||||||||
| Selection of the appropriate material for any given control or chemical injection line is subject to the prevailing operational and site conditions. In order to assist in the selection, the following tables provide internal pressure ratings and the adjustments factors for a range of common grades and sizes of seamless and laser welded stainless tubing. | ||||||||||||||||
| Maximum pressure (P) for TP 316L at 100°F (38°C)1) | ||||||||||||||||
| Please refer to grade and product form adjustment factors below. | ||||||||||||||||
| Outside diameter, in. | Wall thickness, in. | Working pressure2) | Burst pressure2) | Collapse pressure4) | ||||||||||||
| psi (MPa) | psi (MPa) | psi (MPa) | ||||||||||||||
| 1/4 | 0.035 | 6,600 (46) | 22,470 (155) | 6,600 (46) | ||||||||||||
| 1/4 | 0.049 | 9,260 (64) | 27,400 (189) | 8,710 (60) | ||||||||||||
| 1/4 | 0.065 | 12,280 (85) | 34,640 (239) | 10,750 (74) | ||||||||||||
| 3/8 | 0.035 | 4,410 (30) | 19,160 (132) | 4,610 (32) | ||||||||||||
| 3/8 | 0.049 | 6,170 (43) | 21,750 (150) | 6,220 (43) | ||||||||||||
| 3/8 | 0.065 | 8,190 (56) | 25,260 (174) | 7,900 (54) | ||||||||||||
| 3/8 | 0.083 | 10,450 (72) | 30,050 (207) | 9,570 (66) | ||||||||||||
| 1/2 | 0.049 | 4,630 (32) | 19,460 (134) | 4,820 (33) | ||||||||||||
| 1/2 | 0.065 | 6,140 (42) | 21,700 (150) | 6,200 (43) | ||||||||||||
| 1/2 | 0.083 | 7,840 (54) | 24,600 (170) | 7,620 (53) | ||||||||||||
| 5/8 | 0.049 | 3,700 (26) | 18,230 (126) | 3,930 (27) | ||||||||||||
| 5/8 | 0.065 | 4,900 (34) | 19,860 (137) | 5,090 (35) | ||||||||||||
| 5/8 | 0.083 | 6,270 (43) | 26,910 (151) | 6,310 (44) | ||||||||||||
| 3/4 | 0.049 | 3,080 (21) | 17,470 (120) | 3,320 (23) | ||||||||||||
| 3/4 | 0.065 | 4,090 (28) | 18,740 (129) | 4,310 (30) | ||||||||||||
| 3/4 | 0.083 | 5,220 (36) | 20,310 (140) | 5,380 (37) | ||||||||||||
| 1) Estimates only. Actual pressures should be calculated considering all stress factors in the system. | ||||||||||||||||
| 2) Based on calculations from API 5C3, using a wall tolerance of +/-10% | ||||||||||||||||
| 3) Based on ultimate strength burst calculations from API 5C3 | ||||||||||||||||
| 4) Based on yield strength collapse calculations from API 5C3 | ||||||||||||||||
| Adjustment factors for working pressure limits1) | ||||||||||||||||
| Pw = reference working pressure rating for TP 316L at 100°F (38°C). To determine working pressure for grade/temperature combination, multiply Pw by adjustment factor. | ||||||||||||||||
| Grade | 100°F | 200°F | 300°F | 400°F | ||||||||||||
| (38°C) | (93°C) | (149°C) | (204°C) | |||||||||||||
| TP 316L, seamless | 1 | 0.87 | 0.7 | 0.63 | ||||||||||||
| TP 316L, welded | 0.85 | 0.74 | 0.6 | 0.54 | ||||||||||||
| Alloy 825, seamless | 1.33 | 1.17 | 1.1 | 1.03 | ||||||||||||
| Alloy 825, welded | 1.13 | 1.99 | 1.94 | 0.88 | ||||||||||||
| 1) Adjustment factors based on allowable stress in ASME. | ||||||||||||||||
| Adjustment factors for burst pressure limits1) | ||||||||||||||||
| Pb = reference burst pressure for TP 316L at 100°F. To determine burst pressure for grade/temperature combination, multiply Pb by adjustment factor. | ||||||||||||||||
| Grade | 100°F | 200°F | 300°F | 400°F | ||||||||||||
| (38°C) | (93°C) | (149°C) | (204°C) | |||||||||||||
| TP 316L, seamless | 1 | 0.93 | 0.87 | 0.8 | ||||||||||||
| TP 316L, welded | 0.85 | 0.79 | 0.74 | 0.68 | ||||||||||||
| Alloy 825, seamless | 1.13 | 1.07 | 1 | 0.87 | ||||||||||||
| Alloy 825, welded | 0.96 | 0.91 | 0.85 | 0.74 | ||||||||||||
|
1) Adjustment factors based on ultimate strength in ASME. |
||||||||||||||||
Chemical composition:
|
316 Stainless steel capillary tube |
|||||||||
| Grade | UNS | C | Cr | Ni | Mo | Others | |||
| max. | |||||||||
|
TP 316L |
S31600/ S31603 |
0.03 |
17.5 |
13 |
2.1 |
0.1 |
|||
| Mechanical properties | |||||||||
| Grade |
Yield strength, |
Tensile strength, |
Elongation |
||||||
|
psi (MPa) |
psi (MPa) |
% |
|||||||
| TP 316L |
32,000 (220) |
75,000 (515) |
35 |
||||||
| Corrosion properties | |||||||||
|
Grade |
UNS |
PRE1) |
CPT2) F (oC) |
Max H2S3) |
CO24) |
||||
|
TP 316L |
S31600/S31603 |
24 |
95 (35) |
No limit |
+ |
||||
Quality advantage:
The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:
1.Non-destructive tests
2. Hydrostatic tests
3.Surface finish controls
4. Dimensional accuracy measurements
5.Flare and coning tests
6. Mechanical and chemical property testing
Stainless steel coil tube Application:
- refrigeration equipment
- evaporator,
- gas liquid delivery
- Condenser
- beverage machine.
Product detail pictures:
Related Product Guide:
Heat-conducting polymer cools hot electronic devices at 200 degrees Celsius | 304l Stainless Steel Capillary Tube
2013 Honda CB500 Series | First Look | 304 Stainless Steel Capillary Tube
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for Good Quality Ss316l 6 Inch Welded Stainless Steel Pipe - Ncoloy 825 (UNS N08825) stainless steel capillary tubings – Sihe , The product will supply to all over the world, such as: Holland, South Korea, Vietnam, We are very responsible for all details on our customers order no matter on warranty quality, satisfied prices, quick delivery, on time communication, satisfied packing, easy payment terms, best shipment terms, after sales service etc. We provide one-stop service and best reliability to our every customers. We work hard with our customers, colleagues, workers to make a better future.
By Vanessa from Lithuania - 2016.04.08 14:55
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Maggie from Nigeria - 2015.09.21 11:01
Related products
-
2017 High quality 1.4845 Stainless Steel Seamle...
We usually believe that one’s character decides products’ high quality, the details decides products’ excellent ,with the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for High definition AISI SS304/304L/316/316L Seamless Stainless Steel Coil Tubing China Supplier, We just not only deliver the superior quality to our clients, but additional even important is our greatest services plus the competitive selling price. We usually believe that one’s character decides prod...
-
Low price for 316l 304 202 201 Steel Pipe Stain...
Manufacturing range: Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to requests. Stainless steel Coiled tubing is available in a range of different product forms depending on the customer requirements. Licancheng sihe stainless steel material manufactures welded and seamless tube...
-
Super Purchasing for Medical Stainless Steel Tu...
We have a professional, efficiency team to provide quality service for our customer. We always follow the tenet of customer-oriented, details-focused for Factory Selling 316 321 Low Hot Sale Stainless Steel Coil Tube, Our clientele mainly distributed within the North America, Africa and Eastern Europe. we are able to supply premium quality goods with the incredibly aggressive price tag. We have a professional, efficiency team to provide quality service for our customer. We always follow the t...
-
One of Hottest for Buy Stainless Steel Pipes Sa...
ASTM A312 Stainless Steel 316 Welded Pipe ASTM A312 welded pipes Suppliers,Stainless Steel Welded Pipes Manufacturer,Stainless Steel ERW Pipes Stockholder,SS ERW Pipes Exporter In China. ERW Pipes are being found in widespread range of applications such as in Petrochemical, Chemical, oil & Gas, Refinery, Fertilizer, Automotive, Bearing, Power, Structural Mechanical applications. We provide these welded pipes in different grades, thickness and sizes as per tailored needs given by our custo...
-
Professional China A179 Heat Exchanger Tube - ...
ASTM A240 316 Stainless Steel Sheet & Plate Stainless steel sheet & plate is often referred to as corrosion-resistant steel since it does not stain, corrode or rust as easily as regular carbon steel. Stainless steel sheet & plate is the perfect is the perfect solution for applications that require the metal to have anti-oxidation qualities. ASTM A240 Type 316 is the second-most common stainless steel next to 304. Stainless Steel Sheet Type 316 generally contains 16% chromium and 1...
-
Factory selling Stainless Steel Coil - Factory...
We believe in: Innovation is our soul and spirit. Good quality is our life. Shopper need to have is our God for Factory making S30403 / S31603 Stainless Steel Super Long Coiled Tubing For Instrument, If you are interested in our products, please feel free to send us your inquiry. We sincerely hope to establish win-win business relationships with you. We believe in: Innovation is our soul and spirit. Good quality is our life. Shopper need to have is our God for 2 Inch Stainless Steel Pipe Coil...
