One of Hottest for 321 347 904l 2205 Stainless Steel Square Tube - 316stainless steel capillary tubing – Sihe
One of Hottest for 321 347 904l 2205 Stainless Steel Square Tube - 316stainless steel capillary tubing – Sihe Detail:
Manufacturing range:
Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to requests
Capillary tubes with a maximum bore of 0.0158 in., available in a wide range of stainless steels. Sandvik capillary tubes are characterized by tight tolerances, and the inside surface of the tubes is free from oil, grease and other particles. This ensures, for example, an optimized and even flow of liquids and gases from the sensor to the measuring instrument.
Stainless steel Coiled tubing is available in a range of different product forms depending on the customer requirements. Licancheng sihe stainless steel material manufactures welded and seamless tube products. The standard grades are 304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) Other grades of stainless steel in duplex and superduplex and nickel alloy are available on request.
Diameter from 3mm (0.118’’) to 25.4mm (1.00’’) OD. Wall thickness from 0.5mm (0.020’’) to 3mm (0.118’’).Tubing can be supplied in the annealed or cold worked stainless steel control line pipe condition.
Specification
- Production standards: ASTM A269/A249, standard
- stainless steel material :304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625)
3. Size range: diameter 3MM(0.118”-25.4(1.0”)MM
4. Wall thicknesses: 0.5mm (0.020’’) to 3mm (0.118’’)
5.General delivery pipe status: half hard / soft bright annealing
6.The tolerance range: diameter: + 0.1mm, wall thickness: + 10%, length: -0/+6mm
7.Annual output: 600 tons
8.Coil lengthsup to: 500MM-13500MM (45000feet)(can be adjusted according to customer requirements)
Commonly Size of stainless steel coiled tube: we can product them as your request.
|
Size of Stainless steel Coil Tube |
||||||||||||||||
|
ITEM |
Grade |
Size |
Pressure |
Length |
||||||||||||
|
1 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.025″ |
3200 |
500-35000 |
||||||||||||
|
2 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.035″ |
3200 |
500-35000 |
||||||||||||
|
3 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.035″ |
2000 |
500-35000 |
||||||||||||
|
4 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.049″ |
2000 |
500-35000 |
||||||||||||
|
5 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.035″ |
1500 |
500-35000 |
||||||||||||
|
6 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.049″ |
1500 |
500-35000 |
||||||||||||
|
7 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.049″ |
1000 |
500-35000 |
||||||||||||
|
8 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.065″ |
1000 |
500-35000 |
||||||||||||
|
9 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.7mm |
3200 |
500-35000 |
||||||||||||
|
10 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.9mm |
3200 |
500-35000 |
||||||||||||
|
11 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×0.9mm |
3000 |
500-35000 |
||||||||||||
|
12 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×1.1mm |
3000 |
500-35000 |
||||||||||||
|
13 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×0.9mm |
2000 |
500-35000 |
||||||||||||
|
14 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×1.1mm |
2000 |
500-35000 |
||||||||||||
|
15 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1mm |
1800 |
500-35000 |
||||||||||||
|
16 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1.2mm |
1800 |
500-35000 |
||||||||||||
|
17 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1mm |
1500 |
500-35000 |
||||||||||||
|
18 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1.2mm |
1500 |
500-35000 |
||||||||||||
|
19 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×2mm |
500 |
500-35000 |
||||||||||||
|
20 |
316L、304L、304 alloy 625 825 2205 2507 |
φ12mm×1.5mm |
500 |
500-35000 |
||||||||||||
|
Pressure tables |
||||||||||||||||
|
Selection of the appropriate material for any given control or chemical injection line is subject to the prevailing operational and site conditions. In order to assist in the selection, the following tables provide internal pressure ratings and the adjustments factors for a range of common grades and sizes of seamless and laser welded stainless tubing. |
||||||||||||||||
|
Maximum pressure (P) for TP 316L at 100°F (38°C)1) |
||||||||||||||||
|
Please refer to grade and product form adjustment factors below. |
||||||||||||||||
|
Outside diameter, in. |
Wall thickness, in. |
Working pressure2) |
Burst pressure2) |
Collapse pressure4) |
||||||||||||
|
psi (MPa) |
psi (MPa) |
psi (MPa) |
||||||||||||||
|
1/4 |
0.035 |
6,600 (46) |
22,470 (155) |
6,600 (46) |
||||||||||||
|
1/4 |
0.049 |
9,260 (64) |
27,400 (189) |
8,710 (60) |
||||||||||||
|
1/4 |
0.065 |
12,280 (85) |
34,640 (239) |
10,750 (74) |
||||||||||||
|
3/8 |
0.035 |
4,410 (30) |
19,160 (132) |
4,610 (32) |
||||||||||||
|
3/8 |
0.049 |
6,170 (43) |
21,750 (150) |
6,220 (43) |
||||||||||||
|
3/8 |
0.065 |
8,190 (56) |
25,260 (174) |
7,900 (54) |
||||||||||||
|
3/8 |
0.083 |
10,450 (72) |
30,050 (207) |
9,570 (66) |
||||||||||||
|
1/2 |
0.049 |
4,630 (32) |
19,460 (134) |
4,820 (33) |
||||||||||||
|
1/2 |
0.065 |
6,140 (42) |
21,700 (150) |
6,200 (43) |
||||||||||||
|
1/2 |
0.083 |
7,840 (54) |
24,600 (170) |
7,620 (53) |
||||||||||||
|
5/8 |
0.049 |
3,700 (26) |
18,230 (126) |
3,930 (27) |
||||||||||||
|
5/8 |
0.065 |
4,900 (34) |
19,860 (137) |
5,090 (35) |
||||||||||||
|
5/8 |
0.083 |
6,270 (43) |
26,910 (151) |
6,310 (44) |
||||||||||||
|
3/4 |
0.049 |
3,080 (21) |
17,470 (120) |
3,320 (23) |
||||||||||||
|
3/4 |
0.065 |
4,090 (28) |
18,740 (129) |
4,310 (30) |
||||||||||||
|
3/4 |
0.083 |
5,220 (36) |
20,310 (140) |
5,380 (37) |
||||||||||||
|
1) Estimates only. Actual pressures should be calculated considering all stress factors in the system. |
||||||||||||||||
|
2) Based on calculations from API 5C3, using a wall tolerance of +/-10% |
||||||||||||||||
|
3) Based on ultimate strength burst calculations from API 5C3 |
||||||||||||||||
|
4) Based on yield strength collapse calculations from API 5C3 |
||||||||||||||||
|
Adjustment factors for working pressure limits1) |
||||||||||||||||
|
Pw = reference working pressure rating for TP 316L at 100°F (38°C). To determine working pressure for grade/temperature combination, multiply Pw by adjustment factor. |
||||||||||||||||
|
Grade |
100°F |
200°F |
300°F |
400°F |
||||||||||||
|
(38°C) |
(93°C) |
(149°C) |
(204°C) |
|||||||||||||
|
TP 316L, seamless |
1 |
0.87 |
0.7 |
0.63 |
||||||||||||
|
TP 316L, welded |
0.85 |
0.74 |
0.6 |
0.54 |
||||||||||||
|
Alloy 825, seamless |
1.33 |
1.17 |
1.1 |
1.03 |
||||||||||||
|
Alloy 825, welded |
1.13 |
1.99 |
1.94 |
0.88 |
||||||||||||
|
1) Adjustment factors based on allowable stress in ASME. |
||||||||||||||||
|
Adjustment factors for burst pressure limits1) |
||||||||||||||||
|
Pb = reference burst pressure for TP 316L at 100°F. To determine burst pressure for grade/temperature combination, multiply Pb by adjustment factor. |
||||||||||||||||
|
Grade |
100°F |
200°F |
300°F |
400°F |
||||||||||||
|
(38°C) |
(93°C) |
(149°C) |
(204°C) |
|||||||||||||
|
TP 316L, seamless |
1 |
0.93 |
0.87 |
0.8 |
||||||||||||
|
TP 316L, welded |
0.85 |
0.79 |
0.74 |
0.68 |
||||||||||||
|
Alloy 825, seamless |
1.13 |
1.07 |
1 |
0.87 |
||||||||||||
|
Alloy 825, welded |
0.96 |
0.91 |
0.85 |
0.74 |
||||||||||||
|
1) Adjustment factors based on ultimate strength in ASME. |
||||||||||||||||
Chemical composition:
|
316 Stainless steel capillary tube |
|||||||||
| Grade | UNS | C | Cr | Ni | Mo | Others | |||
| max. | |||||||||
|
TP 316L |
S31600/ S31603 |
0.03 |
17.5 |
13 |
2.1 |
0.1 |
|||
| Mechanical properties | |||||||||
| Grade |
Yield strength, |
Tensile strength, |
Elongation |
||||||
|
psi (MPa) |
psi (MPa) |
% |
|||||||
| TP 316L |
32,000 (220) |
75,000 (515) |
35 |
||||||
| Corrosion properties | |||||||||
|
Grade |
UNS |
PRE1) |
CPT2) F (oC) |
Max H2S3) |
CO24) |
||||
|
TP 316L |
S31600/S31603 |
24 |
95 (35) |
No limit |
+ |
||||
Quality advantage:
The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:
1.Non-destructive tests
2. Hydrostatic tests
3.Surface finish controls
4. Dimensional accuracy measurements
5.Flare and coning tests
6. Mechanical and chemical property testing
Stainless steel coil tube Application:
- refrigeration equipment
- evaporator,
- gas liquid delivery
- Condenser
- beverage machine.
Product detail pictures:
Related Product Guide:
2018 Kawasaki Z900RS | Back To The Future | 304l Stainless Steel Capillary Tube
Researchers create predictable patterns from unpredictable carbon nanotubes | 34mm Seamless Steel Pipe Tube
We have been also concentrating on enhancing the things management and QC method so that we could preserve terrific edge inside the fiercely-competitive enterprise for One of Hottest for 321 347 904l 2205 Stainless Steel Square Tube - 316stainless steel capillary tubing – Sihe , The product will supply to all over the world, such as: Benin, Florence, Lyon, We welcome you to visit our company & factory and our showroom displays various products and solutions that will meet your expectations. Meanwhile, it is convenient to visit our website. Our sales staff will try their best to supply you with the best services. If you will need more information, please do not hesitate to contact us via E-mail, fax or telephone.
By Bella from Mexico - 2015.09.29 13:24
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Denise from Houston - 2015.09.29 13:24
Related products
-
Popular Design for 1cr18ni9ti Stainless Steel P...
The key to our success is “Good Merchandise High-quality, Reasonable Cost and Efficient Service” for Factory made hot-sale China Stainless Steel Cooling Coil Tube, 304 Stainless Steel Welded Coil Tubing, We warmly welcome you to definitely build cooperation and produce a bright long run along with us. The key to our success is “Good Merchandise High-quality, Reasonable Cost and Efficient Service” for China Steel, Stainless Steel, As an experienced factory we also accep...
-
Professional Design Best Price Stainless Steel ...
The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Price Sheet for China 316L Capillary Tubing Supplier, With us your money in protected your business enterprise in secure . Hope we can be your trustworthy supplier in China . Searching forward for your cooperation . The pretty loaded projects management experiences and one to a person support model...
-
professional factory for Tp304/316l/321 Stainle...
We consistently carry out our spirit of ”Innovation bringing enhancement, Highly-quality making sure subsistence, Management promoting profit, Credit score attracting prospects for Manufacturer for Heat Exchanger Stainless Steel Coil Tube Manufacture And, In a word, when you choose us, you choose a best life. Welcome to go to our manufacturing facility and welcome your get! For further more inquiries, you should do not hesitate to get hold of us. We consistently carry out our spirit of ...
-
New Arrival China Weld Pipe 201 201 304 316 - ...
ASTM A312 Stainless Steel 201 Welded Pipe ASTM A312 welded pipes Suppliers,Stainless Steel Welded Pipes Manufacturer,Stainless Steel ERW Pipes Stockholder,SS ERW Pipes Exporter In China. ERW Pipes are being found in widespread range of applications such as in Petrochemical, Chemical, oil & Gas, Refinery, Fertilizer, Automotive, Bearing, Power, Structural Mechanical applications. We provide these welded pipes in different grades, thickness and sizes as per tailored needs given by our custo...
-
Cheap price Stainless Steel Continual Oil Tube ...
ASTM A312 Stainless Steel 202 Welded Pipe ASTM A312 welded pipes Suppliers,Stainless Steel Welded Pipes Manufacturer,Stainless Steel ERW Pipes Stockholder,SS ERW Pipes Exporter In China. ERW Pipes are being found in widespread range of applications such as in Petrochemical, Chemical, oil & Gas, Refinery, Fertilizer, Automotive, Bearing, Power, Structural Mechanical applications. We provide these welded pipes in different grades, thickness and sizes as per tailored needs given by our custo...
-
Factory Supply 304l Stainless Steel Pipe - DIN...
DIN Stainless Steel 409 Welded Pipe ASTM A312 welded pipes Suppliers,Stainless Steel Welded Pipes Manufacturer,Stainless Steel ERW Pipes Stockholder,SS ERW Pipes Exporter In China. ERW Pipes are being found in widespread range of applications such as in Petrochemical, Chemical, oil & Gas, Refinery, Fertilizer, Automotive, Bearing, Power, Structural Mechanical applications. We provide these welded pipes in different grades, thickness and sizes as per tailored needs given by our customers. ...
