Professional Design 304 Stainless Steel Coil Tube - Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304 – Sihe
Professional Design 304 Stainless Steel Coil Tube - Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304 – Sihe Detail:
We insist around the principle of enhancement of ‘High good quality, Performance, Sincerity and Down-to-earth working approach’ to provide you with superb assistance of processing for Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304, We are going to endeavor to maintain our great status as the very best solutions supplier in the earth. When you have any questions or opinions, be sure to contact with us freely.
We insist around the principle of enhancement of ‘High good quality, Performance, Sincerity and Down-to-earth working approach’ to provide you with superb assistance of processing for 304 Stainless Steel Plate, 304 Stainless Steel Sheet, We are going to not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced merchandise constantly to satisfactorily meet the needs of our clients all over the world.
Stainless steel sheet
Thickness: 10mm-100mm & 0.3mm-2mm
Width: 1.2m, 1.5m or as per request
Technique: Cold rolled or hot rolled
Surface treatment: Polished or as requirement
Application:
Steel sheet applies to construction field, ships building industry, petroleum& chemical industries, war and electricity industries, food processing and boiler heat exchanger machinery and hardware fields etc.
Quality standard: GB 3274-2007 or equivalent to ASTM/JIS/DIN/BS etc
Steel grade:
200, 300, 400 series
( 201, 202, 304, 304L, 309S, 310S, 316, 316L, 317L, 321, 347H, 409410S, 420, 430, etc)
Type: Steel plate
Special use: High-strength steel plate
If you need, pls contact with me freely. Your response will be highly appreciated.
1. Chemical Requirements
pecification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max. | |||||||
JIS | SUS301 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | |||
G4303 | SUS302 | 0.15 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | |||
G4304 | SUS304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.50 | |||
G4305 | SUS304L | 0.03 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 9.00-13.00 | |||
G4312 | SUS304J3 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.50 | Cu:1.00-3.00 | ||
SUH309 | 0.2 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUS309S | 0.08 | 1 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
SUH310 | 0.25 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS310S | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
SUS316 | 0.08 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | |||
SUS316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | |||
SUS317 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | |||
SUS321 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | 5*C Min. | |||
SUS347 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Nb:10*C Min. | |||
SUSXM7 | 0.08 | 1 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.50-10.50 | Cu:3.00-4.00 | |||
SUH409 | 0.08 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUH409L | 0.03 | 1 | 1 | 0.04 | 0.03 | 10.50-11.75 | 6*C to 0.75 | ||||
SUS410 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | |||||
SUS420J1 | 0.16-0.25 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS420J2 | 0.26-0.40 | 1 | 1 | 0.04 | 0.03 | 12.00-14.00 | |||||
SUS430 | 0.12 | 0.75 | 1 | 0.04 | 0.03 | 16.00-18.00 | |||||
SUS434 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75~1.25 | ||||
ASTM Specification | |||||||||||
Specification | Steel Grade | C% | Si% | Mn% | P% | S% | Cr% | Ni% | Mo% | Ti% | OTHER |
Max. | Max. | Max. | Max. | Max | |||||||
ASTM | S30100 | 0.15 | 1 | 2 | 0.045 | 0.03 | 16.00-18.00 | 6.00-8.00 | N:0.10 Max | ||
A240 | S30200 | 0.15 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 8.00-10.00 | N:0.10 Max | ||
S30400 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-10.5 | N:0.10 Max | |||
S30403 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 8.00-12.00 | N:0.10 Max | |||
S30908 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 22.00-24.00 | 12.00-15.00 | ||||
S31008 | 0.08 | 1.5 | 2 | 0.045 | 0.03 | 24.00-26.00 | 19.00-22.00 | ||||
S31600 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31603 | 0.03 | 0.75 | 2 | 0.045 | 0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | N:0.10 Max | ||
S31700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | N:0.10 Max | ||
S32100 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-12.00 | 5*(C+N) Min. | N:0.10 Max | ||
0.70 Max | |||||||||||
S34700 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00-19.00 | 9.00-13.00 | Cb:10*CM in. | |||
1.00 Max | |||||||||||
S40910 | 0.03 | 1 | 1 | 0.045 | 0.03 | 10.50-11.70 | 0.5Max | Ti:6*CMin. | |||
0.5 Max. | |||||||||||
S41000 | 0.15 | 1 | 1 | 0.04 | 0.03 | 11.50-13.50 | 0.75Max | ||||
S43000 | 0.12 | 1 | 1 | 0.04 | 0.03 | 16.00-18.00 | 0.75Max |
Surface for stainless steel :
Our warehouse:
Product detail pictures:
Related Product Guide:
Nanoengineers 3-D print lifelike, functional blood vessel network that could pave the way toward artificial organs | 34mm Seamless Steel Pipe Tube
Catalytic molten metals for the direct conversion of methane to hydrogen and separable carbon | 304 Stainless Steel Capillary Tube
With this motto in mind, we've got develop into amongst one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Professional Design 304 Stainless Steel Coil Tube - Factory source 304 Stainless Steel Plate / Stainless Steel Sheet 304 – Sihe , The product will supply to all over the world, such as: Saudi Arabia, Auckland, Johannesburg, All the imported machines effectively control and guarantee the machining precision for the items. Besides, we have a group of high-quality management personnels and professionals, who make the high-quality items and have the ability to develop new merchandise to expand our market home and abroad. We sincerely expect customers come for a blooming business for both of us.
By Sandra from Albania - 2015.09.23 18:44
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Agatha from Qatar - 2016.06.22 12:49