Renewable Design for Stainless Steel Coiled Capillary Tube - Super Duplex 2507 (UNS S32750)stainless steel capillary tubing – Sihe
Renewable Design for Stainless Steel Coiled Capillary Tube - Super Duplex 2507 (UNS S32750)stainless steel capillary tubing – Sihe Detail:
Manufacturing range:
Stainless steel capillary, stainless steel small tube is widely used in medical treatment, fiber-optic, pen making, electronic welding products, light cable joint, food, vintage, dairy, drink, pharmacy and biochemistry, different length can be provided according to requests
Capillary tubes with a maximum bore of 0.0158 in., available in a wide range of stainless steels. Sandvik capillary tubes are characterized by tight tolerances, and the inside surface of the tubes is free from oil, grease and other particles. This ensures, for example, an optimized and even flow of liquids and gases from the sensor to the measuring instrument.
Stainless steel Coiled tubing is available in a range of different product forms depending on the customer requirements. Licancheng sihe stainless steel material manufactures welded and seamless tube products. The standard grades are 304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625) Other grades of stainless steel in duplex and superduplex and nickel alloy are available on request.
Diameter from 3mm (0.118’’) to 25.4mm (1.00’’) OD. Wall thickness from 0.5mm (0.020’’) to 3mm (0.118’’).Tubing can be supplied in the annealed or cold worked stainless steel control line pipe condition.
Specification
- Production standards: ASTM A269/A249, standard
- stainless steel material :304 304L 316L(UNS S31603) Duplex 2205 (UNS S32205 & S31803) Super Duplex 2507 (UNS S32750) Incoloy 825 (UNS N08825) Inconel 625 (UNS N06625)
3. Size range: diameter 3MM(0.118”-25.4(1.0”)MM
4. Wall thicknesses: 0.5mm (0.020’’) to 3mm (0.118’’)
5.General delivery pipe status: half hard / soft bright annealing
6.The tolerance range: diameter: + 0.1mm, wall thickness: + 10%, length: -0/+6mm
7.Annual output: 600 tons
8.Coil lengthsup to: 500MM-13500MM (45000feet)(can be adjusted according to customer requirements)
Commonly Size of stainless steel coiled tube: we can product them as your request.
|
Size of Stainless steel Coil Tube |
||||||||||||||||
|
ITEM |
Grade |
Size |
Pressure |
Length |
||||||||||||
|
1 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.025″ |
3200 |
500-35000 |
||||||||||||
|
2 |
316L、304L、304 alloy 625 825 2205 2507 |
1/8″×0.035″ |
3200 |
500-35000 |
||||||||||||
|
3 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.035″ |
2000 |
500-35000 |
||||||||||||
|
4 |
316L、304L、304 alloy 625 825 2205 2507 |
1/4″×0.049″ |
2000 |
500-35000 |
||||||||||||
|
5 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.035″ |
1500 |
500-35000 |
||||||||||||
|
6 |
316L、304L、304 alloy 625 825 2205 2507 |
3/8″×0.049″ |
1500 |
500-35000 |
||||||||||||
|
7 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.049″ |
1000 |
500-35000 |
||||||||||||
|
8 |
316L、304L、304 alloy 625 825 2205 2507 |
1/2″×0.065″ |
1000 |
500-35000 |
||||||||||||
|
9 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.7mm |
3200 |
500-35000 |
||||||||||||
|
10 |
316L、304L、304 alloy 625 825 2205 2507 |
φ3mm×0.9mm |
3200 |
500-35000 |
||||||||||||
|
11 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×0.9mm |
3000 |
500-35000 |
||||||||||||
|
12 |
316L、304L、304 alloy 625 825 2205 2507 |
φ4mm×1.1mm |
3000 |
500-35000 |
||||||||||||
|
13 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×0.9mm |
2000 |
500-35000 |
||||||||||||
|
14 |
316L、304L、304 alloy 625 825 2205 2507 |
φ6mm×1.1mm |
2000 |
500-35000 |
||||||||||||
|
15 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1mm |
1800 |
500-35000 |
||||||||||||
|
16 |
316L、304L、304 alloy 625 825 2205 2507 |
φ8mm×1.2mm |
1800 |
500-35000 |
||||||||||||
|
17 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1mm |
1500 |
500-35000 |
||||||||||||
|
18 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×1.2mm |
1500 |
500-35000 |
||||||||||||
|
19 |
316L、304L、304 alloy 625 825 2205 2507 |
φ10mm×2mm |
500 |
500-35000 |
||||||||||||
|
20 |
316L、304L、304 alloy 625 825 2205 2507 |
φ12mm×1.5mm |
500 |
500-35000 |
||||||||||||
| Pressure tables | ||||||||||||||||
| Selection of the appropriate material for any given control or chemical injection line is subject to the prevailing operational and site conditions. In order to assist in the selection, the following tables provide internal pressure ratings and the adjustments factors for a range of common grades and sizes of seamless and laser welded stainless tubing. | ||||||||||||||||
| Maximum pressure (P) for TP 316L at 100°F (38°C)1) | ||||||||||||||||
| Please refer to grade and product form adjustment factors below. | ||||||||||||||||
| Outside diameter, in. | Wall thickness, in. | Working pressure2) | Burst pressure2) | Collapse pressure4) | ||||||||||||
| psi (MPa) | psi (MPa) | psi (MPa) | ||||||||||||||
| 1/4 | 0.035 | 6,600 (46) | 22,470 (155) | 6,600 (46) | ||||||||||||
| 1/4 | 0.049 | 9,260 (64) | 27,400 (189) | 8,710 (60) | ||||||||||||
| 1/4 | 0.065 | 12,280 (85) | 34,640 (239) | 10,750 (74) | ||||||||||||
| 3/8 | 0.035 | 4,410 (30) | 19,160 (132) | 4,610 (32) | ||||||||||||
| 3/8 | 0.049 | 6,170 (43) | 21,750 (150) | 6,220 (43) | ||||||||||||
| 3/8 | 0.065 | 8,190 (56) | 25,260 (174) | 7,900 (54) | ||||||||||||
| 3/8 | 0.083 | 10,450 (72) | 30,050 (207) | 9,570 (66) | ||||||||||||
| 1/2 | 0.049 | 4,630 (32) | 19,460 (134) | 4,820 (33) | ||||||||||||
| 1/2 | 0.065 | 6,140 (42) | 21,700 (150) | 6,200 (43) | ||||||||||||
| 1/2 | 0.083 | 7,840 (54) | 24,600 (170) | 7,620 (53) | ||||||||||||
| 5/8 | 0.049 | 3,700 (26) | 18,230 (126) | 3,930 (27) | ||||||||||||
| 5/8 | 0.065 | 4,900 (34) | 19,860 (137) | 5,090 (35) | ||||||||||||
| 5/8 | 0.083 | 6,270 (43) | 26,910 (151) | 6,310 (44) | ||||||||||||
| 3/4 | 0.049 | 3,080 (21) | 17,470 (120) | 3,320 (23) | ||||||||||||
| 3/4 | 0.065 | 4,090 (28) | 18,740 (129) | 4,310 (30) | ||||||||||||
| 3/4 | 0.083 | 5,220 (36) | 20,310 (140) | 5,380 (37) | ||||||||||||
| 1) Estimates only. Actual pressures should be calculated considering all stress factors in the system. | ||||||||||||||||
| 2) Based on calculations from API 5C3, using a wall tolerance of +/-10% | ||||||||||||||||
| 3) Based on ultimate strength burst calculations from API 5C3 | ||||||||||||||||
| 4) Based on yield strength collapse calculations from API 5C3 | ||||||||||||||||
| Adjustment factors for working pressure limits1) | ||||||||||||||||
| Pw = reference working pressure rating for TP 316L at 100°F (38°C). To determine working pressure for grade/temperature combination, multiply Pw by adjustment factor. | ||||||||||||||||
| Grade | 100°F | 200°F | 300°F | 400°F | ||||||||||||
| (38°C) | (93°C) | (149°C) | (204°C) | |||||||||||||
| TP 316L, seamless | 1 | 0.87 | 0.7 | 0.63 | ||||||||||||
| TP 316L, welded | 0.85 | 0.74 | 0.6 | 0.54 | ||||||||||||
| Alloy 825, seamless | 1.33 | 1.17 | 1.1 | 1.03 | ||||||||||||
| Alloy 825, welded | 1.13 | 1.99 | 1.94 | 0.88 | ||||||||||||
| 1) Adjustment factors based on allowable stress in ASME. | ||||||||||||||||
| Adjustment factors for burst pressure limits1) | ||||||||||||||||
| Pb = reference burst pressure for TP 316L at 100°F. To determine burst pressure for grade/temperature combination, multiply Pb by adjustment factor. | ||||||||||||||||
| Grade | 100°F | 200°F | 300°F | 400°F | ||||||||||||
| (38°C) | (93°C) | (149°C) | (204°C) | |||||||||||||
| TP 316L, seamless | 1 | 0.93 | 0.87 | 0.8 | ||||||||||||
| TP 316L, welded | 0.85 | 0.79 | 0.74 | 0.68 | ||||||||||||
| Alloy 825, seamless | 1.13 | 1.07 | 1 | 0.87 | ||||||||||||
| Alloy 825, welded | 0.96 | 0.91 | 0.85 | 0.74 | ||||||||||||
|
1) Adjustment factors based on ultimate strength in ASME. |
||||||||||||||||
Chemical composition:
|
316 Stainless steel capillary tube |
|||||||||
| Grade | UNS | C | Cr | Ni | Mo | Others | |||
| max. | |||||||||
|
TP 316L |
S31600/ S31603 |
0.03 |
17.5 |
13 |
2.1 |
0.1 |
|||
| Mechanical properties | |||||||||
| Grade |
Yield strength, |
Tensile strength, |
Elongation |
||||||
|
psi (MPa) |
psi (MPa) |
% |
|||||||
| TP 316L |
32,000 (220) |
75,000 (515) |
35 |
||||||
| Corrosion properties | |||||||||
|
Grade |
UNS |
PRE1) |
CPT2) F (oC) |
Max H2S3) |
CO24) |
||||
|
TP 316L |
S31600/S31603 |
24 |
95 (35) |
No limit |
+ |
||||
Quality advantage:
The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:
1.Non-destructive tests
2. Hydrostatic tests
3.Surface finish controls
4. Dimensional accuracy measurements
5.Flare and coning tests
6. Mechanical and chemical property testing
Stainless steel coil tube Application:
- refrigeration equipment
- evaporator,
- gas liquid delivery
- Condenser
- beverage machine.
Product detail pictures:
Related Product Guide:
2013 Honda CB500 Series | First Look | Stainless Steel Pipe 304
Harley-Davidson Announces New Low Rider And SuperLow 1200T Models | 34mm Seamless Steel Pipe Tube
Our company insists all along the quality policy of "product quality is base of enterprise survival; customer satisfaction is the staring point and ending of an enterprise; persistent improvement is eternal pursuit of staff" and the consistent purpose of "reputation first, customer first" for Renewable Design for Stainless Steel Coiled Capillary Tube - Super Duplex 2507 (UNS S32750)stainless steel capillary tubing – Sihe , The product will supply to all over the world, such as: Ghana, Zurich, Canada, After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good solutions quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!
By Myrna from Panama - 2015.02.08 16:45
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Christine from Amman - 2016.09.22 11:32
Related products
-
factory Outlets for Astm A269 A270 Stainless St...
JIS SUS316 stainless steel polishing tube stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube suppliers stainless steel coil tube manufacturers stainless steel pipe coil Specification: Item:stainless steel polishing pipe Type:welded or seamless Standard:ASTM A554 JIS ,DIN Grade:201,202, 304, 304L,316, 316L,409, 430,etc Size:Round pipe:OD 8-219m Square Pipe: OD 10x10mm -150x150mm Rectangle Pipe:10x20mm to 120x180...
-
Reliable Supplier Stainless Steel Tube Iso Cert...
Usually customer-oriented, and it’s our ultimate focus on being not only one of the most responsible, trustable and honest provider, but also the partner for our clients for 2019 Good Quality Stainless Steel Tubes At All Levels Ss304 316l 316ti 309s 310, Now we have four leading solutions. Our merchandise are greatest sold not only in the Chinese sector, but also welcomed from the international market. Usually customer-oriented, and it’s our ultimate focus on being not only one of...
-
OEM/ODM Supplier Heat Exchanger Piping Detail -...
Stainless steel Precision pipe for 304 grade Stainless steel pipe is one of the more standardized materials in the building and engineering industries. Stainless Steel Seamless Pipes is a hollow steel bar, a large number of pipes used for conveying fluids, such as oil, gas, water, gas, steam,heat exchanger,mechanical machine. Specification Standard:ASTM A-312、ASTM A-269、ASTM A-632、ASTM A-213,DIN 17458、DIN17456 JIS G3463、JIS G3459、JIS G3448 Material Grade:201/202/304/316 Outer Diameter:...
-
Manufacturing Companies for 420 Stainless Steel...
409 stainless steel welded pipe for exhaust pipe Stainless Steel coil products： stainless steel coil tube stainless steel tube coil stainless steel coil tubing stainless steel coil pipe stainless steel coil tube suppliers stainless steel coil tube manufacturers stainless steel pipe coil Specification: Item:stainless steel welded polishing pipe Type:welded Standard:ASTM A554 JIS ,DIN Grade:201,202, 304,304L,316,316L,409,430,etc Size:Round pipe:OD 8-219m Square Pipe: OD 10x10mm -150x150mm Rect...
-
OEM China 60mm Od Stainless Steel Tube - Leadi...
We’ve been convinced that with joint efforts, the enterprise between us will bring us mutual benefits. We could guarantee you item excellent and aggressive price tag for Leading Manufacturer for China AISI 304 Stainless Steel Capillary Pipe, Welcome any inquiry to our firm. We will be happy to ascertain helpful business enterprise relationships along with you! We’ve been convinced that with joint efforts, the enterprise between us will bring us mutual benefits. We could guarantee ...
-
Popular Design for Ss306 Hot Rolled Coil Tisco ...
We have been ready to share our knowledge of internet marketing worldwide and recommend you suitable items at most aggressive selling prices. So Profi Tools give you ideal benefit of money and we have been ready to create with each other with China Gold Supplier for Stainless Steel Decorative Cooling Coil Tube, With the development of society and economy, our company will keep a tenet of “Focus on trust, quality the first”, moreover, we expect to create a glorious future with ever...
